Our next to skin fit that contours the body for no distractions

Body fit

Our close to body fit with a low profile silhouette for ease of movement

Slim fit

Our standard, slightly off body fit for unrestricted comfort

Regular fit

Our roomy, off body fit for maximum comfort and easy layering

Relaxed fit

key.measurement

key.chest

key.waist

key.hips

key.arm_length

key.arm_length_tall

<p>A rain-ready jacket with minimalist leanings and waterproof-breathable versatility. It’s designed for semi-urban adventures like ferrying between Gulf Islands or touring Portland’s brewpubs.</p><ul><li>Made of 50-denier nylon in a 2.5-layer waterproof-breathable construction. Fabric has a polyurethane membrane and a DWR finish, and the inner layer features a custom print</li><li>Seams are fully taped</li><li>2 zippered handwarmer pockets</li><li>Attached hood is adjustable with rear snap and side toggles. Laminated brim sheds rain away from your face</li><li>Full-length front zipper has a storm flap secured with Velcro® and snaps</li><li>Cuffs are adjustable with snap and tab closures</li><li>Chin guard is lined with a soft knit</li><li>Hook hanging loop</li><li>Care instructions: Close all zippers and Velcro before washing. Tumble dry low. Don’t use fabric softeners or bleach. Rinse thoroughly. Steam iron at medium temperature. Do not dry clean</li></ul>

MEC Aquanator Jacket - Men's

The standard test for waterproof fabrics uses a standing column filled with water.  The figures given are the water column height.  A rating of 3,500mm or higher can be considered waterproof.  The higher the rating, the more durable the waterproof fabric will be over time.

Waterproof garments use waterproof-breathable technologies and are fully seam-taped. Water-resistant garments use waterproof-breathable technologies but their seams are not taped. Water-resistant garments repel water and protect against wind but are not made of waterproof fabric.

A windproof garment does not allow any air to permeate the fabric.  A garment with windproof panels has panels of fabric that are totally windproof, but the rest of the garment may not be windproof.  A wind-resistant garment resists some wind, but not as much as a garment that is windproof.

The rate at which a waterproof breathable fabric expels moisture when the inner surface is moist from perspiration.  Values under 8,000g/m2/24h provide low performance, 20,000g/m2/24h provide moderate performance and values over 30,000g/m2/24h provide high performance.

Usually referred to as DWR. A treatment made to fabrics that causes water to bead and run off instead of soaking through. 

Adventure Awaits! Gear up for your next journey with 20% off select travel essentials. Discount applied in-cart.

MEC Aquanator Jacket - Men's

Compare (0)