Make the holidays easier with our ultimate gift guide. Hand-picked gift ideas for activities, budgets and your favourite people – all backed by our Rocksolid Guarantee.

Testing image grid

Rock climbing

MEC - Holiday Gift Guide

New deals dropping – see what’s fresh

Free store pickup and returns. Find out more

Phone: (250) 448-7637

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



## Tune-up packages
###### *Parts are not included in tune-up prices.* **Add-on services for all Tune-up packages: bike cleaning fee $20, hub repack (single) $20, spoke replacement $10 (spokes and nipples not included).



#### Basic Tune-up $100
*For when your bike hasn’t had a tune-up after a season of light use. Designed to get you rolling smoothly again by solving your drivetrain issues, imprecise shifting, loose feeling brakes, or when the whole bike is feeling slightly off.*

- Full bike safety check; all bolts, pivot points, and components inspected for proper torque and wear levels
- Light cleaning -- Frame and fork wiped down and inspected 
- Tires inflated, chain lubricated, and grease applied to seatpost
- Bearing adjustments -- including headset, and front and rear hubs
- Brake systems adjusted -- including cable adjustments and pad position 
- Shifting systems adjusted  -- including cable adjustments and hanger alignment
- Minor wheel truing -- lateral truing and light radial adjustments (spoke replacements extra)
- Minor components installed (chain, cassette, brake pads, tubes) 

#### Advanced Tune-up $140
*For when your bike hasn't had a tune-up after a season of regular riding or has issues caused by dirt, component wear, or light damage. If your bike has poor or inconsistent shifting, soft brakes, or the wheels aren’t straight, this package is for you.*

- Includes every service from the Basic Tune-up, plus:
- Major wheel truing as needed -- including tension and dish adjustments
- Drivetrain removed and fully washed, lubricated, and reinstalled
- Frame, fork, and wheels cleaned -- including braking surfaces
- Installation of up to 2 cables, with housing **parts extra

#### Advanced Plus Tune-up $220
*A comprehensive service for well-used bikes that need of some TLC.*

- Includes every service from the Advanced Tune-up, plus:
- Headset and Wheel bearings cleaned and repacked
- Hydraulic brakes bled, or the installation of all cables and hosing for non-hydraulic systems
- Installation of intermediate-level components (bottom bracket, spoke replacements, tubeless sealant refresh) **parts extra

#### Premium Tune-up 
*Available in Road and MTB specific packages. This complete service gets your bike looking and feeling brand new.*

- Includes every service from the Advanced PLUS Tune-up, plus:
- Complete tear down and rebuild (MTB includes linkages)
- Full frame, component, and wheel detailing
- ** NOT included -- Specialty services such as: Suspension services, dropper post services, and wheel building.




### A la carte bike services
 
|**Wheels**|**Price**|
| ---|--- |
| Tire or tube install| $12|
| Specialty Tire or Tube Install (e-bikes, fat bikes, etc)| $20|
| Wheel true| $15 – $20|
| Wheel build| $70 and up|
| Hub adjustment| $10 – $20|
| Hub overhaul| $25|
| ---|--- |
|**Brakes**|**Price**|
| Brake adjustment| $15 – $25|
| Brake bleed| $30|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
| ---|--- |
|**Drivetrain**|**Price**|
| Gear adjustment| $15 – $20|
| Chain installation| $8 - $17|
| Bottom bracket replacement -- *BB Removal, frame prepped, installation (parts not included)*| $30|
| Shimano internal geared hub service -- *Disassembly, fluid replacement, and lubrication*| $70|
| Shimano Di2 reprogramming and firmware update -- *call for store availability*| $35|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
|---|--- |  
|**Other services**|**Price**|
| Headset adjustment| $10|
| Headset overhaul| $30|
| Miscellaneous accessory install| $10 – $35|
| Bar tape installation -- *Tape extra*| $25|
| Bike boxing -- *Partial disassembly and packaging for shipping or airplane travel*| $60|
| General repairs -- *Minimum shop charge is $5*| $80/hr|





Bike shop

Your local MEC store is more than just a place to get gear – it’s a hub for your outdoor community. MEC All Out (our community program) has all kinds of ways to help you get outside:

### Local events
Year-round, MEC offers low cost (or even free) clinics and workshops. Find [MEC events](https://events.mec.ca/&organization=mec) near you see what’s happening in store, learn new outdoor skills from friendly staff instructors, and spark ideas for your next outdoor trip.

### Grants and donations
Our community program has given tens of millions of dollars to help people in Canada get active outdoors. Have an awesome outdoor idea? Check out our [community grants](/en/explore/spring-and-fall-grants) and [grassroots product donations](/en/explore/grassroots-product-donations) for criteria and applications.



### Free meeting room
*We’re taking precautionary steps due to COVID-19, and pausing all bookings of the Community Room for the moment.  We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings. We will continue to monitor and reassess the situation as it evolves. For groups with a current booking, we’ll contact you by email to ensure you can plan accordingly.  *



Community

If you love trails, snow, water or fresh air, this is your store. Visit MEC Kelowna for outdoor gear, know-how and inspiration.

Located in the heart of the city, MEC Kelowna is a prime location for Okanagan residents and visitors. The store opened in 2016 after doing extensive renovations to an existing building, which included updates to make the space more energy efficient. Here are some of the green features:

- Moved into an existing building, which saved on construction materials and the embodied energy costs.
- Significant updates to the roof insulation, since that’s a major spot to cut down on heat loss (just like people, buildings can lose a lot of heat through their highest point).
- Rooftop solar system pre-heats the hot water for the building to cut down on energy required.
- Upgraded to a high-efficiency HVAC to reduce energy use, and a heat recovery ventilator reduces the amount of energy required to heat the building.
- Furniture is certified by Level, a third-party sustainability certification program that looks at environmental and social impacts.
- To cut down on materials required, there are minimal floor coverings.
- To reduce energy consumption, we use predominately high-efficiency LED lighting controlled by auto dimmers and occupancy sensors in some areas, and on automated schedules elsewhere.
- Landscaping uses non-invasive species that encourage bird and insect populations, and doesn’t need irrigation except for in drought conditions.
- Low-flow fixtures such as toilets, urinals and shower heads reduce overall water consumption.

Like all MEC buildings, we’re proud to say that this store is carbon neutral. We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/), which means that Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



Green building features

For the safety of staff and members, we are pausing in-store gear repair services for a while. Thanks for your understanding. Want to try some repairs on your own? Learn how to fix your own gear with these [how-to articles and videos on popular gear repair topics](/en/explore/product-care-and-maintenance).

### Recycling
If you bought any of the items below at MEC, you can bring them back to our store for recycling:

- Batteries (no broken or corroded ones please).

Have a question about something that’s not on the list above? Give us a call or contact your local municipal recycling program.



Repairs and recycling

Professional ski and snowboard shop services to set you up for the season. Some services may not be available year-round. Call us to set up a visit.

Buy two of the big three – board/skis, bindings, boots – from MEC and we’ll mount your bindings for free. This offer applies to all types of snowboard and ski equipment sold at MEC. If you’re shopping online, take advantage of this deal by calling your store to arrange an appointment to mount your bindings before you visit. Our ski techs get busy, and we don’t want to let you down.



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Alpine| $50|
| Alpine touring| $50|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (hand)| $35|
| Pine tar*Call for availability*| $30|

| Additional services| 
|----|----|
| ---| ---|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|

| Snowshoe services| 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement (per rivet)| $15/unit|
| Binding strap replacement (per strap)| $15/unit|



Ski services

Store Pickup

We are following the advice and guidance of local health authorities to ensure we are providing the safest possible environment to MEC members and staff.

We aim to provide a safe environment that respects everyone’s comfort level and risk tolerance. Thanks for looking out for each other.

Order online and [pick up](/en/explore/in-store-pickup) at this location.

You can [return](/en/explore/covid-19-shipping-and-returns-updates) products to any store.



Welcome

Phone: (902) 421-2667

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



## Tune-up packages
###### *Parts are not included in tune-up prices.* **Add-on services for all Tune-up packages: bike cleaning fee $20, hub repack (single) $20, spoke replacement $10 (spokes and nipples not included).



#### Basic Tune-up $100
*For when your bike hasn’t had a tune-up after a season of light use. Designed to get you rolling smoothly again by solving your drivetrain issues, imprecise shifting, loose feeling brakes, or when the whole bike is feeling slightly off.*

- Full bike safety check; all bolts, pivot points, and components inspected for proper torque and wear levels
- Light cleaning -- Frame and fork wiped down and inspected 
- Tires inflated, chain lubricated, and grease applied to seatpost
- Bearing adjustments -- including headset, and front and rear hubs
- Brake systems adjusted -- including cable adjustments and pad position 
- Shifting systems adjusted  -- including cable adjustments and hanger alignment
- Minor wheel truing -- lateral truing and light radial adjustments (spoke replacements extra)
- Minor components installed (chain, cassette, brake pads, tubes) 

#### Advanced Tune-up $140
*For when your bike hasn't had a tune-up after a season of regular riding or has issues caused by dirt, component wear, or light damage. If your bike has poor or inconsistent shifting, soft brakes, or the wheels aren’t straight, this package is for you.*

- Includes every service from the Basic Tune-up, plus:
- Major wheel truing as needed -- including tension and dish adjustments
- Drivetrain removed and fully washed, lubricated, and reinstalled
- Frame, fork, and wheels cleaned -- including braking surfaces
- Installation of up to 2 cables, with housing **parts extra

#### Advanced Plus Tune-up $220
*A comprehensive service for well-used bikes that need of some TLC.*

- Includes every service from the Advanced Tune-up, plus:
- Headset and Wheel bearings cleaned and repacked
- Hydraulic brakes bled, or the installation of all cables and hosing for non-hydraulic systems
- Installation of intermediate-level components (bottom bracket, spoke replacements, tubeless sealant refresh) **parts extra

#### Premium Tune-up 
*Available in Road and MTB specific packages. This complete service gets your bike looking and feeling brand new.*

- Includes every service from the Advanced PLUS Tune-up, plus:
- Complete tear down and rebuild (MTB includes linkages)
- Full frame, component, and wheel detailing
- ** NOT included -- Specialty services such as: Suspension services, dropper post services, and wheel building.




### A la carte bike services
 
|**Wheels**|**Price**|
| ---|--- |
| Tire or tube install| $12|
| Specialty Tire or Tube Install (e-bikes, fat bikes, etc)| $20|
| Wheel true| $15 – $20|
| Wheel build| $70 and up|
| Hub adjustment| $10 – $20|
| Hub overhaul| $25|
| ---|--- |
|**Brakes**|**Price**|
| Brake adjustment| $15 – $25|
| Brake bleed| $30|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
| ---|--- |
|**Drivetrain**|**Price**|
| Gear adjustment| $15 – $20|
| Chain installation| $8 - $17|
| Bottom bracket replacement -- *BB Removal, frame prepped, installation (parts not included)*| $30|
| Shimano internal geared hub service -- *Disassembly, fluid replacement, and lubrication*| $70|
| Shimano Di2 reprogramming and firmware update -- *call for store availability*| $35|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
|---|--- |  
|**Other services**|**Price**|
| Headset adjustment| $10|
| Headset overhaul| $30|
| Miscellaneous accessory install| $10 – $35|
| Bar tape installation -- *Tape extra*| $25|
| Bike boxing -- *Partial disassembly and packaging for shipping or airplane travel*| $60|
| General repairs -- *Minimum shop charge is $5*| $80/hr|






### Free display space
Not-for-profit groups and local clubs that share MEC values can use our floor space to tell people what’s going on. Let people know about outdoor issues, collect input on plans, or just get the word out about your club. For more info, please email hal_aa@mec.ca or phone the store.



If you love trails, snow, water or fresh air, this is your store. Visit MEC Halifax for outdoor gear, know-how and inspiration.

MEC arrived in the Atlantic region in 2001 with our Halifax store. We moved into an existing building and used as many of the on-site structural elements as possible. While this store wasn’t built from the ground up, we still found ways to make small changes that add up to energy savings over time. Here are some of the green features:

- Moved into an existing building, which saved on construction materials and the embodied energy costs.
- To cut down on materials required, there are minimal floor and ceiling coverings.
- We’re replacing some of the conventional lighting with energy saving LED fixtures.

Like all MEC buildings, we’re proud to say that this store is carbon neutral. We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/), which means that Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Telemark| $50|
| Alpine touring| $50|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (hand)| $35|
| Pine tar*Call for availability*| $30|

| Additional services| 
|----|----|
| ---| ---|
| Skin fit and shaping*Call for availability*| $25|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|

| Snowshoe services| 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement| $15/unit|
| Binding strap replacement| $15/unit|



**MEC is closely monitoring provincial government guidelines to ensure the safety of all members and staff.**

#### Safety measures
- Number of people inside stores is limited and controlled at all entrances.  
- Social distancing guidelines are posted outside and inside stores.
- Lineup areas have two-meter markers on the floor.
- Staff are required to wear personal protective equipment, including masks.
- Hand sanitizer stations are set up for members and staff to use.  
- Staff practice and promote everyday preventive behaviours including frequent hand washing and social distancing.  
- Common areas including doors, staircases, cash desks, and bike fitting areas are regularly disinfected.  
- Cleaning processes are enhanced for the entire store. 
- Restrictions on the type of clothing and gear members are permitted to try on.  
- Plexiglass shields are installed at cashier stations. 

#### Service updates  
- Climbing walls and play areas are closed.  
- Clinics, events and community room bookings are paused.  
- Rental services are paused.  
- Repair shops are open for bike and ski repairs only.

#### Facilities and supply chain
- We are following all government advisories regarding gathering sizes and retail operations  
- We remain committed to our responsible sourcing practices. MEC continues to uphold standards for the health and safety of people who make and distribute the products we sell.   









Phone: (613) 729-2700

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



## Tune-up packages
###### *Parts are not included in tune-up prices.* **Add-on services for all Tune-up packages: bike cleaning fee $20, hub repack (single) $20, spoke replacement $10 (spokes and nipples not included).




#### Basic Tune-up $100
*For when your bike hasn’t had a tune-up after a season of light use. Designed to get you rolling smoothly again by solving your drivetrain issues, imprecise shifting, loose feeling brakes, or when the whole bike is feeling slightly off.*

- Full bike safety check; all bolts, pivot points, and components inspected for proper torque and wear levels
- Light cleaning -- Frame and fork wiped down and inspected 
- Tires inflated, chain lubricated, and grease applied to seatpost
- Bearing adjustments -- including headset, and front and rear hubs
- Brake systems adjusted -- including cable adjustments and pad position 
- Shifting systems adjusted  -- including cable adjustments and hanger alignment
- Minor wheel truing -- lateral truing and light radial adjustments (spoke replacements extra)
- Minor components installed (chain, cassette, brake pads, tubes) 

#### Advanced Tune-up $140
*For when your bike hasn't had a tune-up after a season of regular riding or has issues caused by dirt, component wear, or light damage. If your bike has poor or inconsistent shifting, soft brakes, or the wheels aren’t straight, this package is for you.*

- Includes every service from the Basic Tune-up, plus:
- Major wheel truing as needed -- including tension and dish adjustments
- Drivetrain removed and fully washed, lubricated, and reinstalled
- Frame, fork, and wheels cleaned -- including braking surfaces
- Installation of up to 2 cables, with housing **parts extra

#### Advanced Plus Tune-up $220
*A comprehensive service for well-used bikes that need of some TLC.*

- Includes every service from the Advanced Tune-up, plus:
- Headset and Wheel bearings cleaned and repacked
- Hydraulic brakes bled, or the installation of all cables and hosing for non-hydraulic systems
- Installation of intermediate-level components (bottom bracket, spoke replacements, tubeless sealant refresh) **parts extra

#### Premium Tune-up 
*Available in Road and MTB specific packages. This complete service gets your bike looking and feeling brand new.*

- Includes every service from the Advanced PLUS Tune-up, plus:
- Complete tear down and rebuild (MTB includes linkages)
- Full frame, component, and wheel detailing
- ** NOT included -- Specialty services such as: Suspension services, dropper post services, and wheel building.




### A la carte bike services
 
|**Wheels**|**Price**|
| ---|--- |
| Tire or tube install| $12|
| Specialty Tire or Tube Install (e-bikes, fat bikes, etc)| $20|
| Wheel true| $20 – $25|
| Wheel build| $70 and up|
| Hub adjustment| $10 – $20|
| Hub overhaul| $25|
| ---|--- |
|**Brakes**|**Price**|
| Brake adjustment| $15 – $25|
| Brake bleed| $30|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
| ---|--- |
|**Drivetrain**|**Price**|
| Gear adjustment| $15 – $20|
| Chain installation| $8 - $17|
| Bottom bracket replacement -- *BB Removal, frame prepped, installation (parts not included)*| $30|
| Shimano internal geared hub service -- *Disassembly, fluid replacement, and lubrication*| $70|
| Shimano Di2 reprogramming and firmware update -- *call for store availability*| $35|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
|---|--- |  
|**Other services**|**Price**|
| Headset adjustment| $10|
| Headset overhaul| $30|
| Miscellaneous accessory install| $10 – $35|
| Bar tape installation -- *Tape extra*| $25|
| Bike boxing -- *Partial disassembly and packaging for shipping or airplane travel*| $60|
| General repairs -- *Minimum shop charge is $5*| $80/hr|




Your local MEC store is more than just a place to get gear – it’s a hub for your outdoor community. MEC All Out (our community program) has all kinds of ways to help you get outside:



### Local events
Find [MEC events](https://events.mec.ca/&organization=mec) near you to see what’s happening in store, make connections with interesting people and get active outdoors. Year-round, MEC offers low cost (or even free) clinics and workshops from friendly staff instructors, plus events happening in the larger community – everything from backcountry navigation classes to film screenings.



### Grants and donations
Our community program has given tens of millions of dollars to help people in Canada get active outdoors. Have an awesome outdoor idea? Check out our [community grants](/en/explore/spring-and-fall-grants) and [grassroots product donations](/en/explore/grassroots-product-donations) for criteria and applications.



If you love trails, snow, water or fresh air, this is your store. Visit MEC Ottawa for outdoor gear, know-how and inspiration.

MEC Ottawa opened in 2000. Before we started construction, there was a 40-year-old building on the site. We carefully dismantled it and then reused as much material as possible for our store. In the end, about 75% of the existing building (by weight) was incorporated into our store. To add to that accomplishment, this was the first retail building in Canada to comply with Canada’s C2000 Green Building Standard. Here are some of the green features:

- 80% of all the material travelled less than 500km to the site, which cuts down on transportation emissions. For example, rock excavated from the site was used in cladding.
- The floor is made from timber reclaimed from the St. Lawrence River and the previous building.
- During construction, we used panelized material and screwed connections, so the building can be taken apart, reused and recycled more easily when it’s reached the end of its life.
- One of the walls on the upper floor is infilled with bailed straw, a natural, renewable resource. (Check it out in the viewing portal.)
- Rock Wool insulation in other walls have 50% recycled content.
- The heating system uses a 94%-efficient natural gas hydronic boiler system to heat water.
- CO2 sensors keep a good balance of fresh air coming in, so energy isn’t wasted in heating or cooling.
- A skylight and roof monitor means we don’t need as much artificial lighting.
- To keep landscaping looking good, the irrigation system uses non-potable rainwater that gets gravity-fed to plants.
- Electric vehicle charging stations have reserved parking spots.

Like all MEC buildings, we’re proud to say that this store is carbon neutral. We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/), which means that Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



For the safety of staff and members, we are pausing in-store gear repair services for a while. Thanks for your understanding. Want to try some repairs on your own? Learn how to fix your own gear with these [how-to articles and videos on popular gear repair topics](/en/explore/product-care-and-maintenance).

### Recycling
If you bought any of the items below at MEC, you can bring them back to our store for recycling:

- Batteries (no broken or corroded ones please).

Due to safety concerns, we do not accept used flammable goods, including camping gas canisters, stove fuel, flares, bear bangers and bear spray. Please contact your local waste management office to find out how to properly dispose of these items.

Have a question about something that’s not on the list above? Give us a call or contact your local municipal recycling program.



Recycling and repairs

| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Telemark| $50|
| Alpine touring| $50|
| Downhill| $50|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (machine)| $15|
| Hot wax (hand)| $35|
| Machine sharpen and wax| $35|

| Additional services| 
|----|----|
| ---| ---|
| Skin fit and shaping*Call for availability*| $25|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|
| Boot punching (First punch)| $50|
| Boot punching (Additional punch)| $25|

| Snowshoe services| 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement (per rivet)| $15/unit|
| Binding strap replacement (per strap)| $15/unit|



Phone: (604) 872-7858

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



## Tune-up packages
###### *Parts are not included in tune-up prices.* **Add-on services for all Tune-up packages: bike cleaning fee $20, hub repack (single) $20, spoke replacement $10 (spokes and nipples not included).





#### Basic Tune-up $100
*For when your bike hasn’t had a tune-up after a season of light use. Designed to get you rolling smoothly again by solving your drivetrain issues, imprecise shifting, loose feeling brakes, or when the whole bike is feeling slightly off.*

- Full bike safety check; all bolts, pivot points, and components inspected for proper torque and wear levels
- Light cleaning -- Frame and fork wiped down and inspected 
- Tires inflated, chain lubricated, and grease applied to seatpost
- Bearing adjustments -- including headset, and front and rear hubs
- Brake systems adjusted -- including cable adjustments and pad position 
- Shifting systems adjusted  -- including cable adjustments and hanger alignment
- Minor wheel truing -- lateral truing and light radial adjustments (spoke replacements extra)
- Minor components installed (chain, cassette, brake pads, tubes) 

#### Advanced Tune-up $140
*For when your bike hasn't had a tune-up after a season of regular riding or has issues caused by dirt, component wear, or light damage. If your bike has poor or inconsistent shifting, soft brakes, or the wheels aren’t straight, this package is for you.*

- Includes every service from the Basic Tune-up, plus:
- Major wheel truing as needed -- including tension and dish adjustments
- Drivetrain removed and fully washed, lubricated, and reinstalled
- Frame, fork, and wheels cleaned -- including braking surfaces
- Installation of up to 2 cables, with housing **parts extra

#### Advanced Plus Tune-up $220
*A comprehensive service for well-used bikes that need of some TLC.*

- Includes every service from the Advanced Tune-up, plus:
- Headset and Wheel bearings cleaned and repacked
- Hydraulic brakes bled, or the installation of all cables and hosing for non-hydraulic systems
- Installation of intermediate-level components (bottom bracket, spoke replacements, tubeless sealant refresh) **parts extra

#### Premium Tune-up 
*Available in Road and MTB specific packages. This complete service gets your bike looking and feeling brand new.*

- Includes every service from the Advanced PLUS Tune-up, plus:
- Complete tear down and rebuild (MTB includes linkages)
- Full frame, component, and wheel detailing
- ** NOT included -- Specialty services such as: Suspension services, dropper post services, and wheel building.




### A la carte bike services
 
|**Wheels**|**Price**|
| ---|--- |
| Tire or tube install| $12|
| Specialty Tire or Tube Install (e-bikes, fat bikes, etc)| $20|
| Wheel true| $15 – $20|
| Wheel build| $70 and up|
| Hub adjustment| $10 – $20|
| Hub overhaul| $25|
| ---|--- |
|**Brakes**|**Price**|
| Brake adjustment| $15 – $25|
| Brake bleed| $30|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
| ---|--- |
|**Drivetrain**|**Price**|
| Gear adjustment| $15 – $20|
| Chain installation| $8 - $17|
| Bottom bracket replacement -- *BB Removal, frame prepped, installation (parts not included)*| $30|
| Shimano internal geared hub service -- *Disassembly, fluid replacement, and lubrication*| $70|
| Shimano Di2 reprogramming and firmware update -- *call for store availability*| $35|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
|---|--- |  
|**Other services**|**Price**|
| Headset adjustment| $10|
| Headset overhaul| $30|
| Miscellaneous accessory install| $10 – $35|
| Bar tape installation -- *Tape extra*| $25|
| Bike boxing -- *Partial disassembly and packaging for shipping or airplane travel*| $60|
| General repairs -- *Minimum shop charge is $5*| $


More than just a place to get gear – this store is a hub for your outdoor community. As a flagship, it’s home to a couple of cool extras, like a bouldering wall and a special space for events.

*We’re taking precautionary steps due to COVID-19, and pausing all community events for the moment. We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings.*

### Local events
Basecamp is our open-concept community space.  Year-round, MEC offers low cost (or even free) clinics and workshops from friendly staff instructors, plus events happening in the larger community – everything from backcountry navigation classes to film screenings. Find [MEC events](https://events.mec.ca/&organization=mec) near you

### Outdoor impact
This year, we’re  donating $1 million to Canadian outdoor organizations to teach outdoor skills, protect wild spaces and grow the communities of people getting active outside. Funding  supports groups across Canada with avalanche safety training, outdoor programs for youth, conserving wilderness and more. [Learn more about community partnerships](/en/explore/outdoor-impact)

### Free display space
Not-for-profit groups and local clubs that share MEC values can use our floor space to tell people what’s going on. Let people know about outdoor issues, collect input on plans, or just get the word out about your club. For more info, please email van_aa@mec.ca or phone the store.



If you love trails, snow, water or fresh air, this is your store. Visit MEC Vancouver for outdoor gear, know-how and inspiration.

MEC was born in Vancouver in 1971. Over the decades, we’ve moved through a number of spaces, and our current flagship store in Olympic Village was designed with sustainability from the ground up.

Here are some of the green features:

- **Wood is good**. In fact, when it’s a mass timber superstructure like this flagship store, wood is great. The timber is a composite, which means it doesn’t use old-growth sources. It’s also a renewable building material, stores carbon, and can easily be reused at the end of its life.
- **Drip, drip, drip**: It rains 150+ days a year here, so we make the most of it. The roof captures rainwater that funnels into an underground cistern to provide up to 80% of the water used for flushing toilets.
- **Less is more**: 30% less s’mores around the campfire? Not so good. 30% less energy used by a building? Brilliant. This space is designed to use almost one-third less energy than the standards set out by the national energy code for buildings.
- **A renewable day in the neighbourhood**: We’re connected to an innovative energy system that recovers heat from untreated urban wastewater (a sanitized way of saying sewage). It’s renewable and doesn’t rely on fossil fuels.
- **Behind the scenes**: Some of the biggest energy savings come from things you can’t see: heating and cooling systems. The building envelope has more insulation than most and the HVAC units are high-efficiency.
- **Carbon neutral**: Like all MEC buildings, this space is operationally carbon neutral. We buy renewable energy certificates (wind and low-impact hydro) to match the electricity we use in this location.
- **Safe for salmon**: It’s official: this building is certified as Salmon-Safe, thanks to its progressive water management practices. It’s only the second Salmon-Safe urban site in BC – [MEC Head Office](/en/explore/head-office) was the first.

MEC aims to minimize environmental impacts and make our buildings healthy, inviting spaces. Learn more about our [green buildings](/en/explore/green-buildings).



For the safety of staff and members, we are pausing in-store gear repair services for a while. Thanks for your understanding. Want to try some repairs on your own? Learn how to fix your own gear with these [how-to articles and videos on popular gear repair topics](/en/explore/product-care-and-maintenance).

### Recycling
If you bought any of the items below at MEC, you can bring them back to our store for recycling:

- Household batteries (no broken or corroded ones please)
- Bicycle tires and tubes
- Climbing rope – it could become dog leashes, acoustic insulation or stuffing

Due to safety concerns, we do not accept used flammable goods, including camping gas canisters, stove fuel, flares, bear bangers and bear spray. Please contact your local waste management office to find out how to properly dispose of these items.

Have a question about something that’s not on the list above? Give us a call or contact your local municipal recycling program.



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Telemark| $50|
| Alpine touring| $50|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (machine)| $15|
| Hot wax (hand)| $35|
| Machine sharpen and wax| $35|
| Pine tar*Call for availability*| $30|

| Additional services| 
|----|----|
| ---| ---|
| Skin fit and shaping*Call for availability*| $25|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|

| Snowshoe services| 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement (per rivet)| $15/unit|
| Binding strap replacement (per strap)| $15/unit|



Canada Day

Labour Day

Thanksgiving

Remembrance Day

Christmas Day

We are following the advice and guidance of local health authorities to ensure we are providing the safest possible environment to MEC members and staff.

We aim to provide a safe environment that respects everyone’s comfort level and risk tolerance. Thanks for looking out for each other.

Order online and [pick up](/en/explore/in-store-pickup) at this location.

You can [return](/en/explore/covid-19-shipping-and-returns-updates) products to any store.


Phone: (514) 788-5878

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



## Tune-up packages
###### *Parts are not included in tune-up prices.* **Add-on services for all Tune-up packages: bike cleaning fee $20, hub repack (single) $20, spoke replacement $10 (spokes and nipples not included).




#### Basic Tune-up $100
*For when your bike hasn’t had a tune-up after a season of light use. Designed to get you rolling smoothly again by solving your drivetrain issues, imprecise shifting, loose feeling brakes, or when the whole bike is feeling slightly off.*

- Full bike safety check; all bolts, pivot points, and components inspected for proper torque and wear levels
- Light cleaning -- Frame and fork wiped down and inspected 
- Tires inflated, chain lubricated, and grease applied to seatpost
- Bearing adjustments -- including headset, and front and rear hubs
- Brake systems adjusted -- including cable adjustments and pad position 
- Shifting systems adjusted  -- including cable adjustments and hanger alignment
- Minor wheel truing -- lateral truing and light radial adjustments (spoke replacements extra)
- Minor components installed (chain, cassette, brake pads, tubes) 

#### Advanced Tune-up $140
*For when your bike hasn't had a tune-up after a season of regular riding or has issues caused by dirt, component wear, or light damage. If your bike has poor or inconsistent shifting, soft brakes, or the wheels aren’t straight, this package is for you.*

- Includes every service from the Basic Tune-up, plus:
- Major wheel truing as needed -- including tension and dish adjustments
- Drivetrain removed and fully washed, lubricated, and reinstalled
- Frame, fork, and wheels cleaned -- including braking surfaces
- Installation of up to 2 cables, with housing **parts extra

#### Advanced Plus Tune-up $220
*A comprehensive service for well-used bikes that need of some TLC.*

- Includes every service from the Advanced Tune-up, plus:
- Headset and Wheel bearings cleaned and repacked
- Hydraulic brakes bled, or the installation of all cables and hosing for non-hydraulic systems
- Installation of intermediate-level components (bottom bracket, spoke replacements, tubeless sealant refresh) **parts extra

#### Premium Tune-up 
*Available in Road and MTB specific packages. This complete service gets your bike looking and feeling brand new.*

- Includes every service from the Advanced PLUS Tune-up, plus:
- Complete tear down and rebuild (MTB includes linkages)
- Full frame, component, and wheel detailing
- ** NOT included -- Specialty services such as: Suspension services, dropper post services, and wheel building.




### A la carte bike services
 
|**Wheels**|**Price**|
| ---|--- |
| Tire or tube install| $12|
| Specialty Tire or Tube Install (e-bikes, fat bikes, etc)| $20|
| Wheel true| $15 – $20|
| Wheel build| $70 and up|
| Hub adjustment| $10 – $20|
| Hub overhaul| $25|
| ---|--- |
|**Brakes**|**Price**|
| Brake adjustment| $15 – $25|
| Brake bleed| $30|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
| ---|--- |
|**Drivetrain**|**Price**|
| Gear adjustment| $15 – $20|
| Chain installation| $8 - $17|
| Bottom bracket replacement -- *BB Removal, frame prepped, installation (parts not included)*| $30|
| Shimano internal geared hub service -- *Disassembly, fluid replacement, and lubrication*| $70|
| Shimano Di2 reprogramming and firmware update -- *call for store availability*| $35|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
|---|--- |  
|**Other services**|**Price**|
| Headset adjustment| $10|
| Headset overhaul| $30|
| Miscellaneous accessory install| $10 – $35|
| Bar tape installation -- *Tape extra*| $25|
| Bike boxing -- *Partial disassembly and packaging for shipping or airplane travel*| $60|
| General repairs -- *Minimum shop charge is $5*| $80/hr|




### Free display space
Not-for-profit groups and local clubs that share MEC values can use our floor space to tell people what’s going on. Let people know about outdoor issues, collect input on plans, or just get the word out about your club. For more info, please email mon_aa@mec.ca or phone the store.

### Free meeting room
*We’re taking precautionary steps due to COVID-19, and pausing all bookings of the Community Room for the moment.  We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings. We will continue to monitor and reassess the situation as it evolves. For groups with a current booking, we’ll contact you by email to ensure you can plan accordingly. *



If you love trails, snow, water or fresh air, this is your store. Visit MEC Montreal for outdoor gear, know-how and inspiration.

MEC Montreal opened in 2003, and was our first store in Quebec. It was also the first retail building in Quebec to meet the national C2000 Green Building Standard, and the amount of energy it consumes is nearly 70% less than was required by the Model National Energy Code at the time of construction. Here are some of the green features:

- The wood deck inside the curved roof was salvaged from the Seagram’s distillery in Ville Lasalle. Salvaged wood is also used in the entrance canopy and railings.
- To reduce material waste, the concrete slabs contain 27% blast furnace slag (a by-product of steel manufacturing).
- 50% of the materials used in the building are made of recycled content, by weight.
- Walls are insulated with cellulose fibre from recycled newsprint to cut down on energy consumption (they provide about twice as much thermal insulation as conventional retail buildings from the same era).
- Captured precipitation (stormwater run-off) from the roof is stored in a 45,000L underground cistern, and is used for landscaping and toilet water – this cuts our potable water use in half.
- To keep energy usage down, the concrete floor acts as a thermal reservoir that’s warmed or cooled by fluid pumped through embedded piping. Twelve geothermal wells pump extracted heat in winter and disperse heat in summer.
- There’s mostly natural ventilation with fresh air coming in through underground tunnels. In summer, warm air rises and escapes through roof vents and motorized window openings.
- CO2 sensors keep a good balance of fresh air coming in, so energy isn’t wasted in heating or cooling.
- Lots of daylight reduces the need for artificial lighting. The lights we do have shut off automatically when there’s enough natural light to save energy (for both the lights and the energy needed to cool heat from the bulbs).

Like all MEC buildings, we’re proud to say that this store is carbon neutral. We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/), which means that Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



For the safety of staff and members, we are pausing in-store gear repair services for a while. Thanks for your understanding. Want to try some repairs on your own? Learn how to fix your own gear with these [how-to articles and videos on popular gear repair topics](/en/explore/product-care-and-maintenance).

### Recycling
If you bought any of the items below at MEC, you can bring them back to our store for recycling:

- Batteries (no broken or corroded ones please).
- Bike tires (no tubes) – they can get ground up for tarmac or playground surfaces.

Due to safety concerns, we do not accept used flammable goods, including camping gas canisters, stove fuel, flares, bear bangers and bear spray. Please contact your local waste management office to find out how to properly dispose of these items.

Have a question about something that’s not on the list above? Give us a call or contact your local municipal recycling program.



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Telemark| $50|
| Alpine touring| $50|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (machine)| $15|
| Hot wax (hand)| $35|
| Machine sharpen and wax| $35|
| Pine tar*Call for availability*| $30|

| Additional services| 
|----|----|
| ---| ---|
| Skin fit and shaping*Call for availability*| $25|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|
| Boot punching (First punch)| $50|
| Boot punching (Additional punch)| $25|

| Snowshoe services| 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement (per rivet)| $15/unit|
| Binding strap replacement (per strap)| $15/unit|



Easter Monday

Phone: Call(905) 333-8559

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



## Tune-up packages
###### *Parts are not included in tune-up prices.* **Add-on services for all Tune-up packages: bike cleaning fee $20, hub repack (single) $20, spoke replacement $10 (spokes and nipples not included).




#### Basic Tune-up $100
*For when your bike hasn’t had a tune-up after a season of light use. Designed to get you rolling smoothly again by solving your drivetrain issues, imprecise shifting, loose feeling brakes, or when the whole bike is feeling slightly off.*

- Full bike safety check; all bolts, pivot points, and components inspected for proper torque and wear levels
- Light cleaning -- Frame and fork wiped down and inspected 
- Tires inflated, chain lubricated, and grease applied to seatpost
- Bearing adjustments -- including headset, and front and rear hubs
- Brake systems adjusted -- including cable adjustments and pad position 
- Shifting systems adjusted  -- including cable adjustments and hanger alignment
- Minor wheel truing -- lateral truing and light radial adjustments (spoke replacements extra)
- Minor components installed (chain, cassette, brake pads, tubes) 

#### Advanced Tune-up $140
*For when your bike hasn't had a tune-up after a season of regular riding or has issues caused by dirt, component wear, or light damage. If your bike has poor or inconsistent shifting, soft brakes, or the wheels aren’t straight, this package is for you.*

- Includes every service from the Basic Tune-up, plus:
- Major wheel truing as needed -- including tension and dish adjustments
- Drivetrain removed and fully washed, lubricated, and reinstalled
- Frame, fork, and wheels cleaned -- including braking surfaces
- Installation of up to 2 cables, with housing **parts extra

#### Advanced Plus Tune-up $220
*A comprehensive service for well-used bikes that need of some TLC.*

- Includes every service from the Advanced Tune-up, plus:
- Headset and Wheel bearings cleaned and repacked
- Hydraulic brakes bled, or the installation of all cables and hosing for non-hydraulic systems
- Installation of intermediate-level components (bottom bracket, spoke replacements, tubeless sealant refresh) **parts extra

#### Premium Tune-up 
*Available in Road and MTB specific packages. This complete service gets your bike looking and feeling brand new.*

- Includes every service from the Advanced PLUS Tune-up, plus:
- Complete tear down and rebuild (MTB includes linkages)
- Full frame, component, and wheel detailing
- ** NOT included -- Specialty services such as: Suspension services, dropper post services, and wheel building.




### A la carte bike services
 
|**Wheels**|**Price**|
| ---|--- |
| Tire or tube install| $12|
| Specialty Tire or Tube Install (e-bikes, fat bikes, etc)| $20|
| Wheel true| $15 – $20|
| Wheel build| $70 and up|
| Hub adjustment| $10 – $20|
| Hub overhaul| $25|
| ---|--- |
|**Brakes**|**Price**|
| Brake adjustment| $15 – $25|
| Brake bleed| $30|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
| ---|--- |
|**Drivetrain**|**Price**|
| Gear adjustment| $15 – $20|
| Chain installation| $8 - $17|
| Bottom bracket replacement -- *BB Removal, frame prepped, installation (parts not included)*| $30|
| Shimano internal geared hub service -- *Disassembly, fluid replacement, and lubrication*| $70|
| Shimano Di2 reprogramming and firmware update -- *call for store availability*| $35|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
|---|--- |  
|**Other services**|**Price**|
| Headset adjustment| $10|
| Headset overhaul| $30|
| Miscellaneous accessory install| $10 – $35|
| Bar tape installation -- *Tape extra*| $25|
| Bike boxing -- *Partial disassembly and packaging for shipping or airplane travel*| $60|
| General repairs -- *Minimum shop charge is $5*| $80/hr|






### Free display space
Not-for-profit groups and local clubs that share MEC values can use our floor space to tell people what’s going on. Let people know about outdoor issues, collect input on plans, or just get the word out about your club. For more info, please email bur_aa@mec.ca or phone the store.

### Free meeting room
*We’re taking precautionary steps due to COVID-19, and pausing all bookings of the Community Room for the moment.  We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings. We will continue to monitor and reassess the situation as it evolves. For groups with a current booking, we’ll contact you by email to ensure you can plan accordingly.  *



If you love trails, snow, water or fresh air, this is your store. Visit MEC Burlington for outdoor gear, know-how and inspiration.

MEC Burlington opened in 2008, and was designed to meet LEED (Leadership in Energy and Environmental Design) Gold certification. Compared to conventional retail buildings from the same period, it was made to be 70% more energy efficient. Here are some of the green features:

- A photovoltaic system generates energy that’s fed into the power grid.
- The structure and envelope are designed to be disassembled and repurposed when the building reaches the end of its useful life.
- There are separate systems for heating, cooling and ventilation to maximize energy efficiency. For heating, there are high-efficiency gas boilers with radiant in-floor heating. For cooling, there’s an ice storage system that uses off-electricity. And for ventilation, there’s a fan-assisted displacement system with heat recovery.
- Many high clerestory windows at roofline reduce the need for artificial lighting. The lights we do have turn down or off automatically when there’s enough natural light to save energy (for both the lights and the energy needed to cool heat from the bulbs).
- The combo of low-flow fixtures and grey water usage cuts potable water requirements by half.
- Captured precipitation (stormwater) provides water for all non-potable uses, like toilets and garden watering. Stormwater gets retained and infiltrated on site and won’t discharge water to municipal storm drains (except under extraordinary circumstances, like an enormous storm).
- Landscaping uses non-invasive species that encourage bird and insect populations.

Like all MEC buildings, we’re proud to say that this store is carbon neutral. We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/), which means that Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



For the safety of staff and members, we are pausing in-store gear repair services for a while. Thanks for your understanding. Want to try some repairs on your own? Learn how to fix your own gear with these [how-to articles and videos on popular gear repair topics](/en/explore/product-care-and-maintenance)

### Recycling
If you bought any of the items below at MEC, you can bring them back to our store for recycling:

- Batteries (no broken or corroded ones please).
- Empty CO2 cartridges used for bike tires and avalanche safety.
- Bike tires (no tubes) – they can get ground up for tarmac or playground surfaces.

Due to safety concerns, we do not accept used flammable goods, including camping gas canisters, stove fuel, flares, bear bangers and bear spray. Please contact your local waste management office to find out how to properly dispose of these items.

Have a question about something that’s not on the list above? Give us a call or contact your local municipal recycling program.



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Telemark| $50|
| Alpine touring| $50|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (hand)| $35|
| Pine tar*Call for availability*| $30|

| Additional services| 
|----|----|
| ---| ---|
| Skin fit and shaping*Call for availability*| $25|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|

| Snowshoe services| 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement – per rivet| $15/unit|
| Binding strap replacement – per strap| $15/unit|



Phone: 450.688.2712

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



## Tune-up packages
###### *Parts are not included in tune-up prices.* **Add-on services for all Tune-up packages: bike cleaning fee $20, hub repack (single) $20, spoke replacement $10 (spokes and nipples not included).




#### Basic Tune-up $100
*For when your bike hasn’t had a tune-up after a season of light use. Designed to get you rolling smoothly again by solving your drivetrain issues, imprecise shifting, loose feeling brakes, or when the whole bike is feeling slightly off.*

- Full bike safety check; all bolts, pivot points, and components inspected for proper torque and wear levels
- Light cleaning -- Frame and fork wiped down and inspected 
- Tires inflated, chain lubricated, and grease applied to seatpost
- Bearing adjustments -- including headset, and front and rear hubs
- Brake systems adjusted -- including cable adjustments and pad position 
- Shifting systems adjusted  -- including cable adjustments and hanger alignment
- Minor wheel truing -- lateral truing and light radial adjustments (spoke replacements extra)
- Minor components installed (chain, cassette, brake pads, tubes) 

#### Advanced Tune-up $140
*For when your bike hasn't had a tune-up after a season of regular riding or has issues caused by dirt, component wear, or light damage. If your bike has poor or inconsistent shifting, soft brakes, or the wheels aren’t straight, this package is for you.*

- Includes every service from the Basic Tune-up, plus:
- Major wheel truing as needed -- including tension and dish adjustments
- Drivetrain removed and fully washed, lubricated, and reinstalled
- Frame, fork, and wheels cleaned -- including braking surfaces
- Installation of up to 2 cables, with housing **parts extra

#### Advanced Plus Tune-up $220
*A comprehensive service for well-used bikes that need of some TLC.*

- Includes every service from the Advanced Tune-up, plus:
- Headset and Wheel bearings cleaned and repacked
- Hydraulic brakes bled, or the installation of all cables and hosing for non-hydraulic systems
- Installation of intermediate-level components (bottom bracket, spoke replacements, tubeless sealant refresh) **parts extra

#### Premium Tune-up 
*Available in Road and MTB specific packages. This complete service gets your bike looking and feeling brand new.*

- Includes every service from the Advanced PLUS Tune-up, plus:
- Complete tear down and rebuild (MTB includes linkages)
- Full frame, component, and wheel detailing
- ** NOT included -- Specialty services such as: Suspension services, dropper post services, and wheel building.




### A la carte bike services
 
|**Wheels**|**Price**|
| ---|--- |
| Tire or tube install| $12|
| Specialty Tire or Tube Install (e-bikes, fat bikes, etc)| $20|
| Wheel true| $15 – $20|
| Wheel build| $70 and up|
| Hub adjustment| $10 – $20|
| Hub overhaul| $25|
| ---|--- |
|**Brakes**|**Price**|
| Brake adjustment| $15 – $25|
| Brake bleed| $30|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
| ---|--- |
|**Drivetrain**|**Price**|
| Gear adjustment| $15 – $20|
| Chain installation| $8 - $17|
| Bottom bracket replacement -- *BB Removal, frame prepped, installation (parts not included)*| $30|
| Shimano internal geared hub service -- *Disassembly, fluid replacement, and lubrication*| $70|
| Shimano Di2 reprogramming and firmware update -- *call for store availability*| $35|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
|---|--- |  
|**Other services**|**Price**|
| Headset adjustment| $10|
| Headset overhaul| $30|
| Miscellaneous accessory install| $10 – $35|
| Bar tape installation -- *Tape extra*| $25|
| Bike boxing -- *Partial disassembly and packaging for shipping or airplane travel*| $60|
| General repairs -- *Minimum shop charge is $5*| $80/hr|



### Free display space
Not-for-profit groups and local clubs that share MEC values can use our floor space to tell people what’s going on. Let people know about outdoor issues, collect input on plans, or just get the word out about your club. For more info, please email lav_aa@mec.ca or phone the store.

### Free meeting room
*We’re taking precautionary steps due to COVID-19, and pausing all bookings of the Community Room for the moment.  We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings. We will continue to monitor and reassess the situation as it evolves. For groups with a current booking, we’ll contact you by email to ensure you can plan accordingly.  *



It’s small, but it does the trick. Available for use by local outdoor clubs, environmental groups and NGOs that have a similar mandate as MEC. Please email lav_aa@mec.ca at least a month before your event to reserve the space.

- Space: fits up to 35
- Equipment: wall-mounted TV with HDMI, dry erase whiteboard, MEC guest wifi
- Seating and tables: long tables, office chairs, folding chairs



If you love trails, snow, water or fresh air, this is your store. Visit MEC Laval for outdoor gear, know-how and inspiration.

The space we are taking over provides great potential to bring the MEC brand to life inside and out.

The design will be in-keeping with the new architectural embodiment of the MEC brand, with extensive use of wood on both the inside and outside of the building. Green building features will include a high-performance building envelope and heating, cooling and ventilation (HVAC) system.

All MEC facilities are subject to our internal green building program, which establishes minimum performance standards. MEC Laval will be no different.

Two of the most important aspects of green buildings are the building envelope and the heating, ventilation and air conditioning (or HVAC) system. The Laval store will provide R40 and R60 thermal performance in the walls and roof, respectively, and feature a best-in-class roof top HVAC system.

Energy efficient lighting will also be used throughout the store. Plus, Renewable Energy Certificates (RECs) will be purchased for all energy consumed by MEC Laval.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



Professional ski and snowboard shop services to set you up for the season. Some services may not be available year-round. Call us to set up a visit.

When you buy 2 or more of the big 3 items (skis, boots or bindings), we’ll mount your bindings for free. This offer applies to all types of ski equipment sold at MEC, and proof of purchase is required. If you’re shopping online, you can take advantage of this deal by placing your order via phone at 1.888.847.0770 or 604.876.6221.



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Telemark| $50|
| Alpine touring| $50|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (hand)| $35|
| Machine sharpen and wax| $35|
| Pine tar*Call for availability*| $30|

| Additional services| 
|----|----|
| ---| ---|
| Skin fit and shaping*Call for availability*| $25|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|



Phone: (416) 340-2667

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.



## Tune-up packages
###### *Parts are not included in tune-up prices.* **Add-on services for all Tune-up packages: bike cleaning fee $20, hub repack (single) $20, spoke replacement $10 (spokes and nipples not included).



#### Basic Tune-up $100
*For when your bike hasn’t had a tune-up after a season of light use. Designed to get you rolling smoothly again by solving your drivetrain issues, imprecise shifting, loose feeling brakes, or when the whole bike is feeling slightly off.*

- Full bike safety check; all bolts, pivot points, and components inspected for proper torque and wear levels
- Light cleaning -- Frame and fork wiped down and inspected 
- Tires inflated, chain lubricated, and grease applied to seatpost
- Bearing adjustments -- including headset, and front and rear hubs
- Brake systems adjusted -- including cable adjustments and pad position 
- Shifting systems adjusted  -- including cable adjustments and hanger alignment
- Minor wheel truing -- lateral truing and light radial adjustments (spoke replacements extra)
- Minor components installed (chain, cassette, brake pads, tubes) 

#### Advanced Tune-up $140
*For when your bike hasn't had a tune-up after a season of regular riding or has issues caused by dirt, component wear, or light damage. If your bike has poor or inconsistent shifting, soft brakes, or the wheels aren’t straight, this package is for you.*

- Includes every service from the Basic Tune-up, plus:
- Major wheel truing as needed -- including tension and dish adjustments
- Drivetrain removed and fully washed, lubricated, and reinstalled
- Frame, fork, and wheels cleaned -- including braking surfaces
- Installation of up to 2 cables, with housing **parts extra

#### Advanced Plus Tune-up $220
*A comprehensive service for well-used bikes that need of some TLC.*

- Includes every service from the Advanced Tune-up, plus:
- Headset and Wheel bearings cleaned and repacked
- Hydraulic brakes bled, or the installation of all cables and hosing for non-hydraulic systems
- Installation of intermediate-level components (bottom bracket, spoke replacements, tubeless sealant refresh) **parts extra

#### Premium Tune-up 
*Available in Road and MTB specific packages. This complete service gets your bike looking and feeling brand new.*

- Includes every service from the Advanced PLUS Tune-up, plus:
- Complete tear down and rebuild (MTB includes linkages)
- Full frame, component, and wheel detailing
- ** NOT included -- Specialty services such as: Suspension services, dropper post services, and wheel building.




### A la carte bike services
 
|**Wheels**|**Price**|
| ---|--- |
| Tire or tube install| $12|
| Specialty Tire or Tube Install (e-bikes, fat bikes, etc)| $20|
| Wheel true| $20 – $25|
| Wheel build| $70 and up|
| Hub adjustment| $10 – $20|
| Hub overhaul| $25|
| ---|--- |
|**Brakes**|**Price**|
| Brake adjustment| $20 – $25|
| Brake bleed| $30|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
| ---|--- |
|**Drivetrain**|**Price**|
| Gear adjustment| $15 – $20|
| Chain installation| $17|
| Bottom bracket replacement -- *BB Removal, frame prepped, installation (parts not included)*| $30|
| Shimano internal geared hub service -- *Disassembly, fluid replacement, and lubrication*| $70|
| Shimano Di2 reprogramming and firmware update -- *call for store availability*| $35|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
|---|--- |  
|**Other services**|**Price**|
| Headset adjustment| $10|
| Headset overhaul| $30|
| Miscellaneous accessory install| $10 – $35|
| Bar tape installation -- *Tape extra*| $25|
| Bike boxing -- *Partial disassembly and packaging for shipping or airplane travel*| $60|
| General repairs -- *Minimum shop charge is $5*| $80/hr|






### Free meeting room
*We’re taking precautionary steps due to COVID-19, and pausing all bookings of the Community Room for the moment.  We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings. We will continue to monitor and reassess the situation as it evolves. For groups with a current booking, we’ll contact you by email to ensure you can plan accordingly.  *





If you love trails, snow, water or fresh air, this is your store. Visit MEC Toronto for outdoor gear, know-how and inspiration.

| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Binding removal*With purchase of new binding or skis*| Free|



| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (hand)| $35|
| Pine tar*Call for availability*| $30|

| Additional services| 
|----|----|
| ---| ---|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|

| Snowshoe services| 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement (per rivet)| $15/unit|
| Binding strap replacement (per strap)| $15/unit|



Friday

Sunday

Thursday

Christmas Eve

Boxing Day

Monday

Tuesday

Wednesday

New Years Eve

New Years Day

**MEC is closely monitoring provincial government guidelines to ensure the safety of all members and staff.**

#### Service updates  
- Climbing walls and play areas are closed.  
- Clinics, events and community room bookings are paused.  
- Rental services are paused.  
- Repair shops are open for bike and ski repairs only.

#### Facilities and supply chain
- We are following all government advisories regarding gathering sizes and retail operations  
- We remain committed to our responsible sourcing practices. MEC continues to uphold standards for the health and safety of people who make and distribute the products we sell.   









Phone: 519.896.4972

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike Fitting services are temporarily paused.

## Tune-up packages
###### *Parts are not included in tune-up prices.* **Add-on services for all Tune-up packages: bike cleaning fee $20, hub repack (single) $20, spoke replacement $10 (spokes and nipples not included).



#### Basic Tune-up $100
*For when your bike hasn’t had a tune-up after a season of light use. Designed to get you rolling smoothly again by solving your drivetrain issues, imprecise shifting, loose feeling brakes, or when the whole bike is feeling slightly off.*

- Full bike safety check; all bolts, pivot points, and components inspected for proper torque and wear levels
- Light cleaning -- Frame and fork wiped down and inspected 
- Tires inflated, chain lubricated, and grease applied to seatpost
- Bearing adjustments -- including headset, and front and rear hubs
- Brake systems adjusted -- including cable adjustments and pad position 
- Shifting systems adjusted  -- including cable adjustments and hanger alignment
- Minor wheel truing -- lateral truing and light radial adjustments (spoke replacements extra)
- Minor components installed (chain, cassette, brake pads, tubes) 

#### Advanced Tune-up $140
*For when your bike hasn't had a tune-up after a season of regular riding or has issues caused by dirt, component wear, or light damage. If your bike has poor or inconsistent shifting, soft brakes, or the wheels aren’t straight, this package is for you.*

- Includes every service from the Basic Tune-up, plus:
- Major wheel truing as needed -- including tension and dish adjustments
- Drivetrain removed and fully washed, lubricated, and reinstalled
- Frame, fork, and wheels cleaned -- including braking surfaces
- Installation of up to 2 cables, with housing **parts extra

#### Advanced Plus Tune-up $220
*A comprehensive service for well-used bikes that need of some TLC.*

- Includes every service from the Advanced Tune-up, plus:
- Headset and Wheel bearings cleaned and repacked
- Hydraulic brakes bled, or the installation of all cables and hosing for non-hydraulic systems
- Installation of intermediate-level components (bottom bracket, spoke replacements, tubeless sealant refresh) **parts extra

#### Premium Tune-up 
*Available in Road and MTB specific packages. This complete service gets your bike looking and feeling brand new.*

- Includes every service from the Advanced PLUS Tune-up, plus:
- Complete tear down and rebuild (MTB includes linkages)
- Full frame, component, and wheel detailing
- ** NOT included -- Specialty services such as: Suspension services, dropper post services, and wheel building.




### A la carte bike services
 
|**Wheels**|**Price**|
| ---|--- |
| Tire or tube install| $12|
| Specialty Tire or Tube Install (e-bikes, fat bikes, etc)| $20|
| Wheel true| $15 – $20|
| Wheel build| $70 and up|
| Hub adjustment| $10 – $20|
| Hub overhaul| $25|
| ---|--- |
|**Brakes**|**Price**|
| Brake adjustment| $15 – $25|
| Brake bleed| $30|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
| ---|--- |
|**Drivetrain**|**Price**|
| Gear adjustment| $15 – $20|
| Chain installation| $8 - $17|
| Bottom bracket replacement -- *BB Removal, frame prepped, installation (parts not included)*| $30|
| Shimano internal geared hub service -- *Disassembly, fluid replacement, and lubrication*| $70|
| Shimano Di2 reprogramming and firmware update -- *call for store availability*| $35|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
|---|--- |  
|**Other services**|**Price**|
| Headset adjustment| $10|
| Headset overhaul| $30|
| Miscellaneous accessory install| $10 – $35|
| Bar tape installation -- *Tape extra*| $25|
| Bike boxing -- *Partial disassembly and packaging for shipping or airplane travel*| $60|
| General repairs -- *Minimum shop charge is $5*| $80/hr|





### Free meeting room
*We’re taking precautionary steps due to COVID-19, and pausing all bookings of the Community Room for the moment.  We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings. We will continue to monitor and reassess the situation as it evolves. For groups with a current booking, we’ll contact you by email to ensure you can plan accordingly.  *



It’s small, but it does the trick. Available for use by local outdoor clubs, environmental groups and NGOs that have a similar mandate as MEC. Please email at least a month before your event to reserve the space.

- Space: fits 15–20, large windows, natural light
- Equipment: Wall-mounted TV with HDMI, projector with HDMI input, mobile projector display, dry erase whiteboard, MEC guest wifi
- Seating and tables: long tables, office chairs, folding chairs



MEC Kitchener is a new purpose-built store that has been constructed to our specifications. The store will join the co-op’s growing portfolio of high-performance green buildings.

All MEC facilities are subject to our internal green building program, which establishes minimum performance standards. MEC Kitchener will be no different. Like all MEC buildings, we’re proud to say that this store will be operationally carbon neutral.

The building incorporates key elements of MEC’s renewed architectural brand, including a distinctive floating canopy to mark the store’s entrance and wood-infused interiors to define the store and display merchandise.

Green building features will include:

- A high-performance building envelope and heating, cooling and ventilation (HVAC) system
- A high R-value thermal barrier, allowing for superior insulation and energy savings.
- Energy-efficient LED lighting and low-flow fixtures throughout the store.

Renewable Energy Certificates (RECs) will be purchased for all energy consumed by MEC Kitchener. We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/). Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (hand)| $35|

| Additional services| 
|----|----|
| ---| ---|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|

| Snowshoe services| 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement (per rivet)| $15/unit|
| Binding strap replacement (per strap)| $15/unit|



(418) 522.8884

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



Welcome back! MEC in Quebec is open with limits to the number of people inside, plus reduced hours and services. We are following the advice and guidance of local health authorities to ensure we are providing the safest possible environment to MEC members and staff.

Note, we are not yet accepting returns in person. For the safety of MEC staff, we are accepting returns by mail only.



If you love trails, snow, water or fresh air, this is your store. Visit MEC Québec City for outdoor gear, know-how and inspiration.

The space we are taking over provides great potential to bring the MEC brand to life inside and out.

The design will be in-keeping with the new architectural embodiment of the MEC brand, with a distinctive floating canopy to mark the store’s entrance and wood-infused interiors to define the store and display merchandise.

All MEC facilities are subject to our internal green building program, which establishes minimum performance standards. MEC’s new Quebec City store will be no different.

Two of the most important aspects of green buildings are the building envelope and the heating, ventilation and air conditioning (or HVAC) system. The new Quebec City store will provide R40 and R60 thermal performance in the walls and roof, respectively, and feature a best-in-class roof top HVAC system.

Energy efficient lighting will also be used throughout the store. Plus, Renewable Energy Certificates (RECs) will be purchased for all energy consumed by MEC’s Quebec City store.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



For the safety of staff and members, we are pausing in-store gear repair services for a while. Thanks for your understanding. Want to try some repairs on your own? Learn how to fix your own gear with these [how-to articles and videos on popular gear repair topics](/en/explore/product-care-and-maintenance).

### Recycling
If you bought any of the items below at MEC, you can bring them back to our store for recycling:

- Batteries (no broken or corroded ones please).
- Bike tires and tubes – they can get ground up for tarmac or playground surfaces.
- Climbing rope – it could become dog leashes, acoustic insulation or stuffing.

Due to safety concerns, we do not accept used flammable goods, including camping gas canisters, stove fuel, flares, bear bangers and bear spray. Please contact your local waste management office to find out how to properly dispose of these items.

Have a question about something that’s not on the list above? Give us a call or contact your local municipal recycling program.



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Telemark| $50|
| Alpine touring| $50|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (hand)| $35|
| Pine tar*Call for availability*| $30|
| Base cleaning| $10|
| Base binder application| $10|

| Additional services| 
|----|----|
| ---| ---|
| Skin fit and shaping*Call for availability*| $25|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|

| Snowshoe services| 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement (per rivet)| $15/unit|
| Binding strap replacement (per strap)| $15/unit|



Phone: 519.668.6657

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.



If you love trails, snow, water or fresh air, this is your store. Visit MEC London for outdoor gear, know-how and inspiration.

The space we have taken over provides great potential to bring the MEC brand to life inside and out.

The completely refurbished building incorporates key elements of MEC’s renewed architectural brand, including a distinctive floating canopy to mark the store’s entrance and wood-infused interiors to define the store and display merchandise.

Our new architectural design is featured in the building and improvements include a new roof with R40 thermal protection and a high-performance heating, cooling and ventilation system.

As part of MEC’s extensive green building program, the store operates on renewable energy.



Phone: (416) 221-0030

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



Bike services

Every purchase at MEC supports your community. From helping people get to Rouge National Urban Park, to leading nature walks and teaching families how to plan their first camping trip, these local organizations and programs make getting outside just a little bit easier. MEC works with many groups in the North York community, including:



Never camped before? Don’t know where to start, or just want a refresher before your next trip? With support from MEC, [Parks Canada’s Learn to Camp program](https://www.pc.gc.ca/en/serapprocher-connect/ltc-dlc) introduces you and your family to the basics of camping in Canada’s beautiful natural settings. Through overnight experiences and daytime workshops, you’ll learn camping skills like how to set up a tent, plan a camping menu and cook outdoors.



MEC and the Canadian Wilderness Parks and Wilderness Society (CPAWS) are working together to create community support for conservation in Rouge National Urban Park and around the GTA. As a chapter of CPAWS, [Wildlands League](https://wildlandsleague.org/)’s mission is to protect the natural world that supports us with a connected network of wild lands and protected natural areas, and to promote recreation and resource use in ways that are sustainable for nature, communities and the economy.



MEC partners with [Parkbus](https://parkbus.ca/index) to help thousands of Canadians visit national and provincial parks from major cities across Canada – including a free shuttle from Toronto to Rouge National Urban Park. From day trips and family camping weekends to wilderness expeditions, Parkbus offers accessible transportation options to help city dwellers connect with nature.



[Healing in Nature: Bereavement Network](http://bereavementnetwork.ca/) (HNBN) is a non-for-profit project that provides grief support for youth and young adults through nature walks. They host walking groups on local trails for youth and young adults who are grieving, including newcomers to the community and refugees.



### Grants and donations
Our grant program has given tens of millions of dollars to conservation and the outdoor community in Canada – everything from product donations and advocacy projects to activity funding and land acquisitions. Find out if your community project is eligible and learn [how to apply for support](/en/explore/apply-grant-support).



If you love trails, snow, water or fresh air, this is your store. Visit MEC North York for outdoor gear, know-how and inspiration.

Events

MEC North York is part of the co-op’s growing portfolio of high-performance green buildings. All MEC facilities are designed to meet these performance standards as part of our internal green building program.

The building incorporates key elements of MEC’s renewed architectural brand, including a distinctive floating canopy to mark the store’s entrance and wood-infused interiors to define the store and display merchandise.

Like all MEC buildings, MEC North York is operationally carbon neutral. The store is designed to be almost 50% more energy efficient than a comparable commercial building, based on Model National Energy Code for Buildings [MNECB] 1997.

Green building features includes a high-performance building envelope and heating, cooling and ventilation (HVAC) system, as well as extensive LED lighting. In addition:

- The high-performance building envelope includes structural insulated panels (SIPs), which allow for superior insulation and energy savings.
- The HVAC system features a heat recovery ventilator with underfloor air distribution, and energy-efficient heat pumps for heating and cooling.
- Energy-efficient LED lighting is installed in 80% of the retail areas.

MEC North York is spread over two floors, with a feature stairwell connecting the two levels. The space is marked by a saw-tooth roof lined with clerestory windows that flood the retail floor with natural light.

MEC North York meets the Tier 1 level of the Toronto Green Standard (TGS).

We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/). Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in all our stores. Learn more about our [green buildings](/en/explore/green-buildings).



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Telemark| $50|
| Alpine touring| $50|
| Downhill| $50|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (machine)| $15|
| Hot wax (hand)| $35|
| Machine sharpen and wax| $35|
| Pine tar*Call for availability*| $30|

| Additional services| 
|----|----|
| ---| ---|
| Skin fit and shaping*Call for availability*| $25|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|



Phone: (403) 269-2420

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



## Tune-up packages
###### *Parts are not included in tune-up prices.* **Add-on services for all Tune-up packages: bike cleaning fee $20, hub repack (single) $20, spoke replacement $10 (spokes and nipples not included).




#### Basic Tune-up $120
*For when your bike hasn’t had a tune-up after a season of light use. Designed to get you rolling smoothly again by solving your drivetrain issues, imprecise shifting, loose feeling brakes, or when the whole bike is feeling slightly off.*

- Full bike safety check; all bolts, pivot points, and components inspected for proper torque and wear levels
- Light cleaning -- Frame and fork wiped down and inspected 
- Tires inflated, chain lubricated, and grease applied to seatpost
- Bearing adjustments -- including headset, and front and rear hubs
- Brake systems adjusted -- including cable adjustments and pad position 
- Shifting systems adjusted  -- including cable adjustments and hanger alignment
- Minor wheel truing -- lateral truing and light radial adjustments (spoke replacements extra)
- Minor components installed (chain, cassette, brake pads, tubes) 

#### Advanced Tune-up $160
*For when your bike hasn't had a tune-up after a season of regular riding or has issues caused by dirt, component wear, or light damage. If your bike has poor or inconsistent shifting, soft brakes, or the wheels aren’t straight, this package is for you.*

- Includes every service from the Basic Tune-up, plus:
- Major wheel truing as needed -- including tension and dish adjustments
- Drivetrain removed and fully washed, lubricated, and reinstalled
- Frame, fork, and wheels cleaned -- including braking surfaces
- Installation of up to 2 cables, with housing **parts extra

#### Advanced Plus Tune-up $240
*A comprehensive service for well-used bikes that need of some TLC.*

- Includes every service from the Advanced Tune-up, plus:
- Headset and Wheel bearings cleaned and repacked
- Hydraulic brakes bled, or the installation of all cables and hosing for non-hydraulic systems
- Installation of intermediate-level components (bottom bracket, spoke replacements, tubeless sealant refresh) **parts extra

#### Premium Tune-up 
*Available in Road and MTB specific packages. This complete service gets your bike looking and feeling brand new.*

- Includes every service from the Advanced PLUS Tune-up, plus:
- Complete tear down and rebuild (MTB includes linkages)
- Full frame, component, and wheel detailing
- ** NOT included -- Specialty services such as: Suspension services, dropper post services, and wheel building.




### A la carte bike services
 
|**Wheels**|**Price**|
| ---|--- |
| Tire or tube install| $12|
| Specialty Tire or Tube Install (e-bikes, fat bikes, etc)| $20|
| Wheel true| $20 – $25|
| Wheel build| $70 and up|
| Hub adjustment| $10 – $20|
| Hub overhaul| $25|
| ---|--- |
|**Brakes**|**Price**|
| Brake adjustment| $15 – $25|
| Brake bleed| $30|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
| ---|--- |
|**Drivetrain**|**Price**|
| Gear adjustment| $15 – $20|
| Chain installation| $8 - $17|
| Bottom bracket replacement -- *BB Removal, frame prepped, installation (parts not included)*| $30|
| Shimano internal geared hub service -- *Disassembly, fluid replacement, and lubrication*| $70|
| Shimano Di2 reprogramming and firmware update -- *call for store availability*| $35|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
|---|--- |  
|**Other services**|**Price**|
| Headset adjustment| $10|
| Headset overhaul| $30|
| Miscellaneous accessory install| $10 – $35|
| Bar tape installation -- *Tape extra*| $25|
| Bike boxing -- *Partial disassembly and packaging for shipping or airplane travel*| $60|
| General repairs -- *Minimum shop charge is $5*| $80/hr|




### Free display space
Not-for-profit groups and local clubs that share MEC values can use our floor space to tell people what’s going on. Let people know about outdoor issues, collect input on plans, or just get the word out about your club. For more info, please email cal_aa@mec.ca or phone the store.

### Free meeting room
*We’re taking precautionary steps due to COVID-19, and pausing all bookings of the Community Room for the moment.  We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings. We will continue to monitor and reassess the situation as it evolves. For groups with a current booking, we’ll contact you by email to ensure you can plan accordingly. *



If you love trails, snow, water or fresh air, this is your store. Visit MEC Calgary for outdoor gear, know-how and inspiration.

When we build a store, we try to recycle or reuse buildings and/or building materials wherever possible. There were fewer opportunities to do this at our Calgary site than at our other stores, but we’ve found ways to improve where we can. Here are some of the green features:****

- To cut down on materials required, there are minimal floor and ceiling coverings.
- To let in as much natural light as possible, we have energy-efficient double-paned windows.
- Since there’s not a lot of natural light in this building, we use energy efficient fluorescent tubes for base lighting and have replaced some of the accent lighting with energy saving LED fixtures.

Like all MEC buildings, we’re proud to say that this store is carbon neutral. We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/), which means that Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Telemark| $50|
| Alpine touring| $50|
| Downhill| $50|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (machine)| $15|
| Hot wax (hand)| $35|
| Machine sharpen and wax| $35|
| Pine tar*Call for availability*| $30|

| Additional services| 
|----|----|
| ---| ---|
| Skin fit and shaping*Call for availability*| $25|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|
| Boot punching (First punch)| $50|
| Boot punching (Additional punch)| $25|

| Snowshoe services| 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement (per rivet)| $15/unit|
| Binding strap replacement (per strap)| $15/unit|



Victoria Day

Phone: 705.792.4675

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused



### Free display space
Not-for-profit groups and local clubs that share MEC values can use our floor space to tell people what’s going on. Let people know about outdoor issues, collect input on plans, or just get the word out about your club. For more info, please email bar_aa@mec.ca or phone the store.

*We’re taking precautionary steps due to COVID-19, and pausing all bookings of the Community Room for the moment.  We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings. We will continue to monitor and reassess the situation as it evolves. For groups with a current booking, we’ll contact you by email to ensure you can plan accordingly.  *



If you love trails, snow, water or fresh air, this is your store. Visit MEC Barrie for outdoor gear, know-how and inspiration.

Located on the way to northern Ontario’s outdoor playgrounds, MEC Barrie opened in 2010. Compared to a conventional retail building about the same size, it was made to be 70% more efficient than those built during the same period. Here are some of the green features:

- A high-efficiency building envelope reduces the amount of energy needed, and has significantly more thermal insulation than conventional buildings.
- The wood, concrete and steel structure is designed to be disassembled and repurposed when the building reaches the end of its useful life.
- To cut down on the amount of energy required for heating and cooling, a concrete slab floor acts as a thermal reservoir which is warmed or cooled by a geo-exchange system that pumps fluid through embedded piping.
- The sawtooth-shaped roof is oriented so the less-intense northern light can help naturally light the store. The more-intense southern light hits the long side of each “tooth” and gets captured by a photovoltaic array.
- Many high clerestory windows at roofline reduce the need for artificial lighting. The lights we do have turn down or off automatically when there’s enough natural light to save energy (for both the lights and the energy needed to cool heat from the bulbs).
- A solar thermal collector on the roof preheats hot water used in the kitchen and bathrooms. The residual heat from this grey water is partially captured and used to preheat other potable water.
- The combo of low-flow fixtures and grey water usage cuts potable water requirements by half.
- Captured precipitation (stormwater) provides water for all non-potable uses, such as toilets. Stormwater gets retained and infiltrated on site and won’t discharge water to municipal storm drains (except under extraordinary circumstances, like an enormous storm).
- Landscaping uses non-invasive species that encourage bird and insect populations, and doesn’t need irrigation except for in drought conditions.

Like all MEC buildings, we’re proud to say that this store is carbon neutral. We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/), which means that Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (hand)| $35|
| Pine tar*Call for availability*| $30|

| Additional services| 
|----|----|
| ---| ---|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|

| Snowshoe services| 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement (per rivet)| $15/unit|
| Binding strap replacement (per strap)| $15/unit|



Phone: (204) 943-4202

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



We are following the advice and guidance of local health authorities to ensure we are providing the safest possible environment to MEC members and staff.



### Free display space
*We’re taking precautionary steps due to COVID-19, and pausing all bookings of the Community Room for the moment. We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings. We will continue to monitor and reassess the situation as it evolves. For groups with a current booking, we’ll contact you by email to ensure you can plan accordingly.*



Not-for-profit groups and local clubs that share MEC values can use our floor space to tell people what’s going on. Let people know about outdoor issues, collect input on plans, or just get the word out about your club. For more info, please email win_aa@mec.ca or phone the store.



### Parking
You can park for free for 1 hour with a $10 minimum purchase at MEC at two locations:

- Indigo Lot, [329 Hargrave Street ](https://www.google.ca/maps/place/Indigo/@49.8947446,-97.1463099,17.18z/data=!4m13!1m7!3m6!1s0x52ea715901e7f247:0x6dac33c6723994fe!2s329+Hargrave+St,+Winnipeg,+MB+R3B+2C3!3b1!8m2!3d49.894627!4d-97.145302!3m4!1s0x52ea7158e285aa9d:0xa9d729f4ba97e0f7!8m2!3d49.894627!4d-97.145302)
- Impark lot, [125 330 Smith Street](https://www.google.ca/maps/place/330+Smith+St+%23125,+Winnipeg,+MB+R3B+2H1/@49.8948779,-97.1449574,17.18z/data=!4m5!3m4!1s0x52ea71596edf24cb:0xc27fb7c2e7abff06!8m2!3d49.8948779!4d-97.1430291)



If you love trails, snow, water or fresh air, this is your store. Visit MEC Winnipeg for outdoor gear, know-how and inspiration.

MEC Winnipeg opened in 2002. Before we moved in, it was the site of three buildings – two of them too dilapidated to be occupied. The buildings were carefully dismantled, and the materials were meticulously inventoried and used to build new sections of the store. About 95% of the existing buildings got reused or recycled in some form.

MEC Winnipeg is LEED Gold certified, and was the second retail building in Canada to meet the national C2000 Green Building Standard (the first was MEC Ottawa). All the energy-saving features in the store make it 65% more efficient than the standards set out in the Model National Energy Code. Here are some of the green features:

- Almost 4000 tonnes of material in the existing buildings was diverted from the landfill.
- All structural materials were reclaimed, including the brick and wood floor, joists, exterior masonry, cast iron columns and steel beams.
- To cut down on new materials required, the ceiling’s exposed, the floors are uncarpeted, and we used minimum drywall.
- Composting toilets provide fertilizer for our rooftop garden. Plus they cut down waste water volume by more than half (which saves 73 cubic meters of water each year).
- CO2 sensors keep a good balance of fresh air coming in, so energy isn’t wasted in heating or cooling.
- To reduce heat loss and energy consumption, outer walls are insulated to an R value of 30, more than twice the R12 called for in the building code.
- A central skylight means we don’t need as much artificial lighting. The lights we do have are high-efficiency with motion sensors to turn them off if no one’s around.
- The green roof provides evaporative cooling and also helps insulate building, which cuts down on energy for heating and cooling.

Like all MEC buildings, we’re proud to say that this store is carbon neutral. We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/), which means that Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



For the safety of staff and members, we are pausing in-store gear repair services for a while. Thanks for your understanding. Want to try some repairs on your own? Learn how to fix your own gear with these [how-to articles and videos on popular gear repair topics](/en/explore/product-care-and-maintenance). 

### Recycling
If you bought any of the items below at MEC, you can bring them back to our store for recycling:

- Batteries (no broken or corroded ones please).
- Bike tires and tubes – they can get ground up for tarmac or playground surfaces.

Have a question about something that’s not on the list above? Give us a call or contact your local municipal recycling program.



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (hand)| $35|
| Pine tar*Call for availability*| $30|

| Additional services| 
|----|----|
| ---| ---|
| Skin fit and shaping*Call for availability*| $25|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|

| Snowshoe services| 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement (per rivet)| $15/unit|
| Binding strap replacement (per strap)| $15/unit|



Phone: (250) 386-2667

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



## Tune-up packages
###### *Parts are not included in tune-up prices.* **Add-on services for all Tune-up packages: bike cleaning fee $20, hub repack (single) $20, spoke replacement $10 (spokes and nipples not included).

#### Basic Tune-up $100
*For when your bike hasn’t had a tune-up after a season of light use. Designed to get you rolling smoothly again by solving your drivetrain issues, imprecise shifting, loose feeling brakes, or when the whole bike is feeling slightly off.*

- Full bike safety check; all bolts, pivot points, and components inspected for proper torque and wear levels
- Light cleaning -- Frame and fork wiped down and inspected 
- Tires inflated, chain lubricated, and grease applied to seatpost
- Bearing adjustments -- including headset, and front and rear hubs
- Brake systems adjusted -- including cable adjustments and pad position 
- Shifting systems adjusted  -- including cable adjustments and hanger alignment
- Minor wheel truing -- lateral truing and light radial adjustments (spoke replacements extra)
- Minor components installed (chain, cassette, brake pads, tubes) 

#### Advanced Tune-up $140
*For when your bike hasn't had a tune-up after a season of regular riding or has issues caused by dirt, component wear, or light damage. If your bike has poor or inconsistent shifting, soft brakes, or the wheels aren’t straight, this package is for you.*

- Includes every service from the Basic Tune-up, plus:
- Major wheel truing as needed -- including tension and dish adjustments
- Drivetrain removed and fully washed, lubricated, and reinstalled
- Frame, fork, and wheels cleaned -- including braking surfaces
- Installation of up to 2 cables, with housing **parts extra

#### Advanced Plus Tune-up $220
*A comprehensive service for well-used bikes that need of some TLC.*

- Includes every service from the Advanced Tune-up, plus:
- Headset and Wheel bearings cleaned and repacked
- Hydraulic brakes bled, or the installation of all cables and hosing for non-hydraulic systems
- Installation of intermediate-level components (bottom bracket, spoke replacements, tubeless sealant refresh) **parts extra

#### Premium Tune-up 
*Available in Road and MTB specific packages. This complete service gets your bike looking and feeling brand new.*

- Includes every service from the Advanced PLUS Tune-up, plus:
- Complete tear down and rebuild (MTB includes linkages)
- Full frame, component, and wheel detailing
- ** NOT included -- Specialty services such as: Suspension services, dropper post services, and wheel building.




### A la carte bike services
 
|**Wheels**|**Price**|
| ---|--- |
| Tire or tube install| $12|
| Specialty Tire or Tube Install (e-bikes, fat bikes, etc)| $20|
| Wheel true| $15 – $20|
| Wheel build| $70 and up|
| Hub adjustment| $10 – $20|
| Hub overhaul| $25|
| ---|--- |
|**Brakes**|**Price**|
| Brake adjustment| $15 – $25|
| Brake bleed| $30|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
| ---|--- |
|**Drivetrain**|**Price**|
| Gear adjustment| $15 – $20|
| Chain installation| $8 - $17|
| Bottom bracket replacement -- *BB Removal, frame prepped, installation (parts not included)*| $30|
| Shimano internal geared hub service -- *Disassembly, fluid replacement, and lubrication*| $70|
| Shimano Di2 reprogramming and firmware update -- *call for store availability*| $35|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
|---|--- |  
|**Other services**|**Price**|
| Headset adjustment| $10|
| Headset overhaul| $30|
| Miscellaneous accessory install| $10 – $35|
| Bar tape installation -- *Tape extra*| $25|
| Bike boxing -- *Partial disassembly and packaging for shipping or airplane travel*| $60|
| General repairs -- *Minimum shop charge is $5*| $80/hr|





### Free display space
*We’re taking precautionary steps due to COVID-19, and pausing all bookings of the Community Room for the moment. We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings. We will continue to monitor and reassess the situation as it evolves. For groups with a current booking, we’ll contact you by email to ensure you can plan accordingly.*



Not-for-profit groups and local clubs that share MEC values can use our floor space to tell people what’s going on. Let people know about outdoor issues, collect input on plans, or just get the word out about your club. For more info, please email vic_aa@mec.ca or phone the store.



If you love trails, snow, water or fresh air, this is your store. Visit MEC Victoria for outdoor gear, know-how and inspiration.

MEC Victoria is in a registered heritage building, known as the Vogue building, that was built as a hotel in 1892. This timber post-and-beam structure has a concrete front and fine architectural detailing, which we modified to expose wood features and improve natural light. It’s a distinctive retail space we’re proud of, and it opened as a store in 2006. Here are some of the green features:****

- Moved into an existing building, which saved on construction materials and the embodied energy costs.
- Used regionally sourced materials where we could to reduce transport emissions.
- Reclaimed wood and strawboard, approved by the Forest Stewardship Council, is used in many displays and fitting rooms.
- Decorative wood boards in fixtures come from reclaimed submerged trees, which are harvested from flooded reservoirs to reduce demand for living trees.
- Marmoleum flooring (made of renewable materials) is used in the lunchroom.
- Carpet tile in the meeting room and offices has recycled content and low VOC (volatile organic compounds).

Like all MEC buildings, we’re proud to say that this store is carbon neutral. We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/), which means that Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



For the safety of staff and members, we are pausing in-store gear repair services for a while. Thanks for your understanding. Want to try some repairs on your own? Learn how to fix your own gear with these [how-to articles and videos on popular gear repair topics](/en/explore/product-care-and-maintenance).

### Recycling
If you bought any of the items below at MEC, you can bring them back to our store for recycling:

- Batteries (no broken or corroded ones please).
- Empty CO2 cartridges used for bike tires and avalanche safety.
- Bike tires and tubes – they can get ground up for tarmac or playground surfaces.

Due to safety concerns, we do not accept used flammable goods, including camping gas canisters, stove fuel, flares, bear bangers and bear spray. Please contact your local waste management office to find out how to properly dispose of these items.

Have a question about something that’s not on the list above? Give us a call or contact your local municipal recycling program.



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Telemark| $50|
| Alpine touring| $50|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (hand)| $35|

| Additional services| 
|----|----|
| ---| ---|
| Skin fit and shaping*Call for availability*| $25|



Phone: (780) 433-0293

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.





### Free display space
Not-for-profit groups and local clubs that share MEC values can use our floor space to tell people what’s going on. Let people know about outdoor issues, collect input on plans, or just get the word out about your club. For more info, please email eso_aa@mec.ca or phone the store.

### Free meeting room
*We’re taking precautionary steps due to COVID-19, and pausing all bookings of the Community Room for the moment.  We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings. We will continue to monitor and reassess the situation as it evolves. For groups with a current booking, we’ll contact you by email to ensure you can plan accordingly.  *





If you love trails, snow, water or fresh air, this is your store. Visit MEC South Edmonton for outdoor gear, know-how and inspiration.

Opening the Edmonton South store involved retrofitting an existing building.

The completely refurbished building incorporates key elements of MEC’s renewed architectural brand, including a distinctive floating canopy to mark the store’s entrance and wood-infused interiors to define the store and display merchandise.

MEC Edmonton South joins the co-op’s growing portfolio of high-performance green buildings.

Like all MEC buildings, we’re proud to say that this store will be operationally carbon neutral, using renewable energy.

Green building improvements include a new roof with R40 thermal protection and a high-performance heating, cooling and ventilation (HVAC) system, as well as extensive LED lighting:

- The high-performance building envelope includes structural insulated panels (SIPs), which allows for superior insulation and energy savings.
- The HVAC system features a heat recovery ventilator with underfloor air distribution, and energy efficient heat pumps for heating and cooling.
- Energy-efficient LED lighting are installed in 80% of the retails areas.

We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/). Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Telemark| $50|
| Alpine touring| $50|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (hand)| $35|
| Pine tar*Call for availability*| $30|

| Additional services| 
|----|----|
| ---| ---|
| Skin fit and shaping*Call for availability*| $25|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|

| Snowshoe services| 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement (per rivet)| $15/unit|
| Binding strap replacement (per strap)| $15/unit|



18/12/2021

19/12/2021

20/12/2021

21/12/2021

22/12/2021

23/12/2021

Phone: 780.488.6614

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



### Free display space
Not-for-profit groups and local clubs that share MEC values can use our floor space to tell people what’s going on. Let people know about outdoor issues, collect input on plans, or just get the word out about your club. For more info, please email edm_aa@mec.ca or phone the store.

### Free meeting room
*We’re taking precautionary steps due to COVID-19, and pausing all bookings of the Community Room for the moment.  We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings. We will continue to monitor and reassess the situation as it evolves. For groups with a current booking, we’ll contact you by email to ensure you can plan accordingly.  *



If you love trails, snow, water or fresh air, this is your store. Visit MEC Edmonton for outdoor gear, know-how and inspiration.

MEC Edmonton will join the co-op’s growing portfolio of high-performance green buildings.

The purpose-built building incorporates key elements of MEC’s renewed architectural brand, including a distinctive floating canopy to mark the store’s entrance and wood-infused interiors to define the store and display merchandise. It recognizes the history of the previous brewery building by incorporating a brown brick façade, for example. To acknowledge the wider region, silo material has been used on the exterior of the structure, paying homage to the prairies.

A standout feature of the new store is the saw-tooth roof, comprised of steel trusses, as well as high windows, allowing the upper floor to be flooded with natural daylight. The entire store will benefit from ample natural light with over 2,500 square feet of windows.

The retail space is spread over two floors and connected by a floating staircase.

Like all MEC buildings, we’re proud to say that this store will be operationally carbon neutral, using renewable energy. The store has been built to achieve a minimum of LEED (Leadership in Energy and Environmental Design) Silver certification. Green building features include:

- The high-performance building envelope has an R60 rating for roof and walls, as well as high-spec glazing on the windows.
- The store will be heated with radiant floor natural gas boilers; a fresh air heat exchanger that is 95% efficient will be installed on the roof. The store will also feature a hot water solar preheating system with high-performance vacuum tube solar collectors.
- Fresh air ventilation will be supplied based on CO2 concentration to reduce energy consumption. The store will be metering water, gas, electricity for energy audit purposes.
- Energy-efficient LED lighting is installed in 100% of the retails areas and throughout the majority of the store; stock rooms are equipped with high-efficiency fluorescent lighting fixtures.
- The site includes a rainwater harvesting system, designed to provide greywater for toilet flushing and landscape irrigation; however, the City of Edmonton doesn’t allow greywater systems at this point, but the system is ready to be put to use once the city allows it.

We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/). Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



For the safety of staff and members, we are pausing in-store gear repair services for a while. Thanks for your understanding. Want to try some repairs on your own? Learn how to fix your own gear with these [how-to articles and videos on popular gear repair topics](/en/explore/product-care-and-maintenance).

### Recycling
If you bought any of the items below at MEC, you can bring them back to our store for recycling:

- AA and AAA batteries (no broken or corroded ones please).
- Bike tires and tubes – they can get ground up for tarmac or playground surfaces.
- Climbing rope – it could become dog leashes, acoustic insulation or stuffing.

Have a question about something that’s not on the list above? Give us a call or contact your local municipal recycling program.



Phone: 604.534.4570

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.




#### Basic Tune-up $100
*For when your bike hasn’t had a tune-up after a season of light use. Designed to get you rolling smoothly again by solving your drivetrain issues, imprecise shifting, loose feeling brakes, or when the whole bike is feeling slightly off.*

- Full bike safety check; all bolts, pivot points, and components inspected for proper torque and wear levels
- Light cleaning -- Frame and fork wiped down and inspected 
- Tires inflated, chain lubricated, and grease applied to seatpost
- Bearing adjustments -- including headset, and front and rear hubs
- Brake systems adjusted -- including cable adjustments and pad position 
- Shifting systems adjusted  -- including cable adjustments and hanger alignment
- Minor wheel truing -- lateral truing and light radial adjustments (spoke replacements extra)
- Minor components installed (chain, cassette, brake pads, tubes) 

#### Advanced Tune-up $140
*For when your bike hasn't had a tune-up after a season of regular riding or has issues caused by dirt, component wear, or light damage. If your bike has poor or inconsistent shifting, soft brakes, or the wheels aren’t straight, this package is for you.*

- Includes every service from the Basic Tune-up, plus:
- Major wheel truing as needed -- including tension and dish adjustments
- Drivetrain removed and fully washed, lubricated, and reinstalled
- Frame, fork, and wheels cleaned -- including braking surfaces
- Installation of up to 2 cables, with housing **parts extra

#### Advanced Plus Tune-up $220
*A comprehensive service for well-used bikes that need of some TLC.*

- Includes every service from the Advanced Tune-up, plus:
- Headset and Wheel bearings cleaned and repacked
- Hydraulic brakes bled, or the installation of all cables and hosing for non-hydraulic systems
- Installation of intermediate-level components (bottom bracket, spoke replacements, tubeless sealant refresh) **parts extra

#### Premium Tune-up 
*Available in Road and MTB specific packages. This complete service gets your bike looking and feeling brand new.*

- Includes every service from the Advanced PLUS Tune-up, plus:
- Complete tear down and rebuild (MTB includes linkages)
- Full frame, component, and wheel detailing
- ** NOT included -- Specialty services such as: Suspension services, dropper post services, and wheel building.




### A la carte bike services
 
|**Wheels**|**Price**|
| ---|--- |
| Tire or tube install| $12|
| Specialty Tire or Tube Install (e-bikes, fat bikes, etc)| $20|
| Wheel true| $15 – $20|
| Wheel build| $70 and up|
| Hub adjustment| $10 – $20|
| Hub overhaul| $25|
| ---|--- |
|**Brakes**|**Price**|
| Brake adjustment| $15 – $25|
| Brake bleed| $30|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
| ---|--- |
|**Drivetrain**|**Price**|
| Gear adjustment| $15 – $20|
| Chain installation| $8 - $17|
| Bottom bracket replacement -- *BB Removal, frame prepped, installation (parts not included)*| $30|
| Shimano internal geared hub service -- *Disassembly, fluid replacement, and lubrication*| $70|
| Shimano Di2 reprogramming and firmware update -- *call for store availability*| $35|
| Cable and housing replacement -- *Installation cost per cable and housing length*| $10|
|---|--- |  
|**Other services**|**Price**|
| Headset adjustment| $10|
| Headset overhaul| $30|
| Miscellaneous accessory install| $10 – $35|
| Bar tape installation -- *Tape extra*| $25|
| Bike boxing -- *Partial disassembly and packaging for shipping or airplane travel*| $60|
| General repairs -- *Minimum shop charge is $5*| $80/hr|






If you love trails, snow, water or fresh air, this is your store. Visit MEC Langley for outdoor gear, know-how and inspiration.

MEC arrived in the Fraser Valley in 2013 with our Langley location. We combined two buildings into one to create this store, and used as many of the on-site structural elements as possible in the process. Moving into an existing building saved on construction materials and the embodied energy costs. We also re-used fixtures and furniture wherever we could, instead of discarding them and replacing them with new pieces.

Like all MEC buildings, we’re proud to say that this store is carbon neutral. We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/), which means that Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



#### Mounting
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Telemark| $50|
| Alpine touring| $50|
| Binding removal -- *With purchase of new binding or skis*| Free|

#### Base tune-up 
|----|----|
| ---| ---|
| General repairs -- *Minimum shop charge is $5*| $70/hr|
| Hot wax (hand)| $35|

#### Additional services 
|----|----|
| ---| ---|
| Skin fit and shaping -- *Call for availability*| $25|
| Boot liner molding -- *With purchase of boots*| Free|
| Boot fitting| $20|

#### Snowshoe services 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement (per rivet)| $15/unit|
| Binding strap replacement (per strap)| $15/unit|



Phone: Call(604) 990-4417

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



### Free display space
Not-for-profit groups and local clubs that share MEC values can use our floor space to tell people what’s going on. Let people know about outdoor issues, collect input on plans, or just get the word out about your club. For more info, please email nvn_aa@mec.ca or phone the store.

### Free meeting room
*We’re taking precautionary steps due to COVID-19, and pausing all bookings of the Community Room for the moment.  We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings. We will continue to monitor and reassess the situation as it evolves. For groups with a current booking, we’ll contact you by email to ensure you can plan accordingly. *



If you love trails, snow, water or fresh air, this is your store. Visit MEC North Vancouver for outdoor gear, know-how and inspiration.

Our MEC North Vancouver store is one of our signature green buildings. It opened its doors in 2012, and is officially designed as a LEED (Leadership in Energy and Environmental Design) Gold certified building. Here are some of the green features:

- The roof and walls make up a highly efficient building envelope through the use of structural insulated panels that cut down on heat loss because of leaking air. This provides significantly more thermal insulation than conventional buildings.
- To cut down on materials required, there are minimal floor and ceiling coverings.
- To cut down on energy required for heating and cooling, a concrete slab floor acts as a giant radiator that’s warmed or cooled by a geo-exchange system in which fluid is pumped through embedded piping. Predictive controls preheat or cool the slab based on forecasted weather.
- The building doesn’t use conventional ducting; the entire first floor acts as one large air duct (or plenum) requiring less fan energy.
- The sawtooth-shaped roof and clerestory windows are oriented so the less-intense northern light can help naturally enter and reflect off the ceiling to flood the retail floor with natural light.
- The lights we do have turn off automatically when there’s enough natural light to save energy (for both the lights and the energy needed to cool heat from the bulbs).
- The non-potable water system is supplied by an onsite well, and is used for toilets and to water the native species of drought-tolerant plants.
- Low-flow fixtures reduce overall water consumption.
- Captured precipitation (stormwater) is held and filtered through bioswales, rain gardens and permeable pavers before it goes back to the water table. There’s no connection to the municipal storm sewer.
- Landscaping seamlessly integrates with the nearby biking and hiking trails in Lynnmouth Park.
- Electric vehicle charging stations have reserved parking spots.

Like all MEC buildings, we’re proud to say that this store is carbon neutral. We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/), which means that Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Telemark| $50|
| Alpine touring| $50|
| Downhill| $50|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (hand)| $35|
| Pine tar*Call for availability*| $30|

| Additional services| 
|----|----|
| ---| ---|
| Skin fit and shaping*Call for availability*| $25|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|

| Snowshoe services| 
|----|----|
| ---| ---|
| Binding replacement| $70/pair|
| Rivet replacement (per rivet)| $15/unit|
| Binding strap replacement (per strap)| $15/unit|



Phone: 450.766.1359

Our bike mechanics can do it all, from installing fenders to building wheels from scratch. Not sure what work your bike needs? Bring it in for a free safety inspection and we’ll let you know. Call us to set up a bike shop visit. Small repairs can be done while you shop.

Bike fitting services are temporarily paused.



### Free meeting room
*We’re taking precautionary steps due to COVID-19, and pausing all bookings of the Community Room for the moment.  We take your health seriously and are following the recommendations of public health agencies to practice social distancing and limit gatherings. We will continue to monitor and reassess the situation as it evolves. For groups with a current booking, we’ll contact you by email to ensure you can plan accordingly.  *



It’s small, but it does the trick. Available for use by local outdoor clubs, environmental groups and NGOs that have a similar mandate as MEC. Please email lon_aa@mec.ca at least a month before your event to reserve the space.



If you love trails, snow, water or fresh air, this is your store. Visit MEC Longueuil for outdoor gear, know-how and inspiration.

The Longueuil store opened its doors to members in 2009. It’s a LEED (Leadership in Energy and Environmental Design) Gold certified building, and was made to be 65% more efficient than conventional retail buildings built during the same period. Here are some of the green features:

- When it was being constructed, 60% of the waste produced got recycled or reused.
- The countertops of the cash registers, bike shop and kitchen are tiled with PaperStone, a stone-like material made from 100% post-consumer recycled paper.
- To cut down on materials required, there are minimal floor and ceiling coverings.
- All the wood used in the construction of the store was sourced following strict sustainable forestry standards.
- Marmoleum flooring (made of renewable materials) is used in some areas.
- The staff kitchen cupboards are made of bamboo plywood (Plyboo®) that was harvested using no irrigation, fertilizers or pesticides.
- To cut down on the amount of energy required for heating and cooling, a concrete slab floor acts as a thermal reservoir which is warmed or cooled by a geo-exchange system that pumps fluid through embedded piping.
- A solar thermal collector on the roof preheats hot water used in the kitchen and bathrooms. The residual heat from this grey water is partially captured and used to preheat other potable water.
- Many high clerestory windows at roofline reduce the need for artificial lighting. The lights we do have turn down or off automatically when there’s enough natural light to save energy (for both the lights and the energy needed to cool heat from the bulbs).
- Captured precipitation (stormwater) is stored in an underground cistern and is used for non-potable water.
- Low-flow fixtures such as toilets, urinals and shower heads cut potable water requirements by half.

Like all MEC buildings, we’re proud to say that this store is carbon neutral. We purchase Green Electricity Certificates and Green Natural Gas Certificates from [Bullfrog Power](https://www.bullfrogpower.com/), which means that Bullfrog procures renewable energy (wind, micro-hydro and biogas) on our behalf for electricity and natural gas.

MEC aims to maximize efficiency and minimize environmental impacts in our stores. Learn more about our [green buildings](/en/explore/green-buildings).



For the safety of staff and members, we are pausing in-store gear repair services for a while. Thanks for your understanding. Want to try some repairs on your own? Learn how to fix your own gear with these [how-to articles and videos on popular gear repair topics](/en/explore/product-care-and-maintenance).

### Recycling
If you bought any of the items below at MEC, you can bring them back to our store for recycling:

- Batteries (no broken or corroded ones please).
- Bike tires and tubes – they can get ground up for tarmac or playground surfaces.
- Bike parts.
- Climbing rope – it could become dog leashes, acoustic insulation or stuffing.

Due to safety concerns, we do not accept used flammable goods, including camping gas canisters, stove fuel, flares, bear bangers and bear spray. Please contact your local waste management office to find out how to properly dispose of these items.

Have a question about something that’s not on the list above? Give us a call or contact your local municipal recycling program.



| Mounting| 
|----|----|
| ---| ---|
| Classic| $30|
| Skate| $30|
| Telemark| $50|
| Alpine touring| $50|
| Binding removal*With purchase of new binding or skis*| Free|

| Base tune-up| 
|----|----|
| ---| ---|
| General repairs*Minimum shop charge is $5*| $70/hr|
| Hot wax (hand)| $35|
| Machine sharpen and wax| $35|
| Pine tar*Call for availability*| $30|
| Base cleaning| $10|
| Base binder application| $10|

| Additional services| 
|----|----|
| ---| ---|
| Skin fit and shaping*Call for availability*| $25|
| Boot liner molding*With purchase of boots*| Free|
| Boot fitting| $20|



Holiday 2021

Testing image grid

Rock climbing

Testing blach blach