MEC Waxwing Jacket - Men's
Break a sweat in cool weather with the right combo of breathability, venting and moisture transport. Fleece on the sides and arms allows a great range of motion when you're skiing or running and allow your heat to disperse efficiently. Primaloft panels insulate your core and offer wind resistance when you're working against a headwind. A durable water repellent (DWR) finish gives you protection from light precipitation when you wear it as an outer layer. On colder days when you need more warmth, the slim fit easily transitions into a mid-layer.
- Shell and lining are ripstop nylon for exceptional durability.
- Fleece sections on the sides, arms and hood are made from a moveable brushed blend of polyester and spandex for warmth and movement.
- Front quilted panels are made from Primaloft® Silver Insulation Eco (a mix of recycled polyester and polyester) for wind resistance.
- DWR-treated to shed snow and rain.
- Mesh vents in front chest with invisible zippers puts you in control of your temperature.
- 2 zippered hand pockets, one with small pocket inside with cord port.
- Thumbholes, because they just make sense.
- 28.5in. from the neck base to bottom of the hem (size medium).
- Reflective black tape overlay at upper chest and upper back keeps you reflective in low light, and subtle in your day-to-day.
|Technology||PrimaLoft Silver Eco|
|Insulation||40g/sq. m polyester|
Waterproof garments use waterproof-breathable technologies and are fully seam-taped. Water-resistant garments use waterproof-breathable technologies but their seams are not taped. Water-resistant garments repel water and protect against wind but are not made of waterproof fabric.
|Venting||Zippered chest vents|
A windproof garment does not allow any air to permeate the fabric. A garment with windproof panels has panels of fabric that are totally windproof, but the rest of the garment may not be windproof. A wind-resistant garment resists some wind, but not as much as a garment that is windproof.
Durable water repellency
Usually referred to as DWR. A treatment made to fabrics that causes water to bead and run off instead of soaking through.
How to measure
- Measure fullest circumference, keeping tape up under arms and across shoulder blades.
- Measure at the narrowest circumference of your waist.
- Stand with feet together and measure at fullest circumference.
- Arm length
- Bend elbow gently, then measure from centre of back of neck out to point of shoulder, down to back of elbow, and forward to wrist.
- Tall arm length
- Bend elbow gently, then measure from centre of back of neck out to point of shoulder, down to back of elbow, and forward to wrist. Not all styles available in 'tall'.