MEC Aquanator Jacket - Boys' - Youths
A little rough weather should not prevent junior funhogs from getting outside. The fully waterproof-breathable fabric on the Aquanator Jacket ensures dryness through wet and windy conditions. The boys' jacket is cut a little straighter through the body and easily fits over several warm layers or just a light jacket as conditions require.
- Shell is abrasion-resistant 75-denier polyester with a polyurethane waterproof breathable coating and a DWR (durable water repellency) finish.
- Fully lined with polyester mesh that slides well over a fleece or sweatshirt and is soft against skin when you wear the jacket over a t-shirt.
- Zippered hand pockets for thawing fingers.
- Storm flap over zipper keeps weather out.
- Elasticized cuffs seal out the cold and damp.
- Reflective details for low-light visibility.
|Technology||Microporous PU laminate|
|Face fabric||75-denier polyester|
Fabric waterproof rating
The standard test for waterproof fabrics uses a standing column filled with water. The figures given are the water column height. A rating of 3,500mm or higher can be considered waterproof. The higher the rating, the more durable the waterproof fabric will be over time.
Waterproof garments use waterproof-breathable technologies and are fully seam-taped. Water-resistant garments use waterproof-breathable technologies but their seams are not taped. Water-resistant garments repel water and protect against wind but are not made of waterproof fabric.
|Waterproof with fully taped seams|
Fabric active breathability
The rate at which a waterproof breathable fabric expels moisture when the inner surface is moist from perspiration. Values under 8,000g/m2/24h provide low performance, 20,000g/m2/24h provide moderate performance and values over 30,000g/m2/24h provide high performance.
A windproof garment does not allow any air to permeate the fabric. A garment with windproof panels has panels of fabric that are totally windproof, but the rest of the garment may not be windproof. A wind-resistant garment resists some wind, but not as much as a garment that is windproof.
Durable water repellency
Usually referred to as DWR. A treatment made to fabrics that causes water to bead and run off instead of soaking through.
|Additional feature(s)||Reflective details|
- Measure fullest circumference, keeping tape up under arms and across shoulder blades.
- Measure at the narrowest circumference of your waist.
- Stand with feet together and measure at fullest circumference.
- Arm length
- Bend elbow gently, then measure from centre of back of neck out to point of shoulder, down to back of elbow, and forward to wrist.
- Measure inner leg from crotch to just below the ankle bone.
- Stand with back straight; measure from highest point on head to floor.