MEC Alpine Go Gore-Tex Rain Jacket - Women's
Shop with confidence. If it’s not working out, you can return it (consumables, undergarments and swimwear excluded).
Really. If it's not up to snuff after you use it (a couple times) you can still bring it back.
It lasts longer than 30 days, but not forever. We'll be fair about it. We're all members here.
Price match guarantee
Found a better deal in Canada? Up to 30 days after purchase – we’ll match it.
If you see a lower price for this exact item advertised online, in print or in a store, give us a call at 1 (888) 847-0770.
If it’s identical, brand-new, in stock, and sold and shipped by a Canadian-based retailer, we’ll match that price.
Sorry, this product is no longer available
Built for flash storms on mountain routes or steady rain on hiking trails, the Alpine Go is a versatile jacket that's both packable and waterproof. Generous underarm zips give you plenty of ventilation when the elevation gain starts to get intense. And if the wind picks up along the ridge, the drawcord-cinch hem and hook-and-loop cuff adjustments won’t let any drafts creep in.
- Lightweight and supple 2.5-layer GORE-TEX® PACLITE® fabric is breathable and exceptionally waterproof.
- DWR finish, fully sealed seams and water-resistant zippers keep rain from sneaking in.
- Adjustable hood with pre-curved brim is helmet compatible.
- Pit zips let you exhaust heat when slogging uphill.
- Handwarmer pockets and a zippered internal chest pocket.
- Drawcord-cinch hem and hook-and-loop cuff adjustments seal out the wind.
Technical garments, designed for specific activities have features that aren’t always adaptable to general use. For example, cycling clothing is longer in the back and arms. Activity aside, the fit of MEC clothing falls into these categories:
|Face fabric||40-denier nylon|
Fabric waterproof rating
The standard test for waterproof fabrics uses a standing column filled with water. The figures given are the water column height. A rating of 3,500mm or higher can be considered waterproof. The higher the rating, the more durable the waterproof fabric will be over time.
Waterproof garments use waterproof-breathable technologies and are fully seam-taped. Water-resistant garments use waterproof-breathable technologies but their seams are not taped. Water-resistant garments repel water and protect against wind but are not made of waterproof fabric.
|Waterproof with fully taped seams|
Fabric active breathability
The rate at which a waterproof breathable fabric expels moisture when the inner surface is moist from perspiration. Values under 8,000g/m2/24h provide low performance, 20,000g/m2/24h provide moderate performance and values over 30,000g/m2/24h provide high performance.
A windproof garment does not allow any air to permeate the fabric. A garment with windproof panels has panels of fabric that are totally windproof, but the rest of the garment may not be windproof. A wind-resistant garment resists some wind, but not as much as a garment that is windproof.
Durable water repellency
Usually referred to as DWR. A treatment made to fabrics that causes water to bead and run off instead of soaking through.
|Additional feature(s)||Wind flap behind zipper|
- Measure fullest circumference, keeping tape up under arms and across shoulder blades.
- Natural waist
- Measure at the narrowest circumference of your waist.
- Stand with feet together and measure at fullest circumference.
- Arm length
- Bend elbow gently, then measure from centre of back of neck out to point of shoulder, down to back of elbow, and forward to wrist.