Our next to skin fit that contours the body for no distractions

Body fit

Our close to body fit with a low profile silhouette for ease of movement

Slim fit

Our standard, slightly off body fit for unrestricted comfort

Regular fit

Our roomy, off body fit for maximum comfort and easy layering

Relaxed fit

key.measurement

key.bust

key.waist_nat

key.hips

key.arm_length

key.arm_length_petite

Digital Violet

Passion Pink

Deep Navy

<p>Lightweight and packable, this fully seam-taped jacket is perfect for activity in wet climates or where you expect foul weather. The Hydrofoil Stretch Jacket's waterproof Pertex Shield construction is ridiculously breathable. 40-denier nylon promises durability and 4-way stretch that’s soft and supple, never crunchy. A helmet-compatible hood and pockets that sit above a hipbelt or harness make it ideal for alpine missions and backcountry trips. Best of all, we’ve kept it amazingly affordable so you can budget for longer climbing trips and extra days on the hill.</p><ul><li>Made of 40-denier nylon with a 2.5-layer Pertex Shield waterproof-breathable laminate</li><li>Fabric has built in 4-way mechanical stretch to move with you</li><li>Exterior is treated with a DWR (durable water repellency) finish to shed precipitation</li><li>Fully taped seams for maximum wet-weather protection</li><li>Fully adjustable hood with reinforced brim is helmet-compatible</li><li>Raglan sleeves for comfort under backpack straps</li><li>Underarm vents use water-resistant Uretek zippers</li><li>2 zippered outer pockets are set high out of the way of a harness or hipbelt</li><li>Articulated elbows for good range of motion</li><li>Hook-and-loop–adjustable sleeve cuffs</li><li>Elastic drawcord at bottom hem</li><li>Cut for layering over light to mid-weight garments</li><li>Length provides extra coverage, and fit works for climbing</li></ul>

MEC Hydrofoil Stretch Jacket - Women's

XX-Small

X-Small

Small

Medium

Large

X-Large

XX-Large

Petite Small

Petite Medium

The standard test for waterproof fabrics uses a standing column filled with water.  The figures given are the water column height.  A rating of 3,500mm or higher can be considered waterproof.  The higher the rating, the more durable the waterproof fabric will be over time.

Waterproof garments use waterproof-breathable technologies and are fully seam-taped. Water-resistant garments use waterproof-breathable technologies but their seams are not taped. Water-resistant garments repel water and protect against wind but are not made of waterproof fabric.

The rate at which a waterproof breathable fabric expels moisture when the inner surface is moist from perspiration.  Values under 8,000g/m2/24h provide low performance, 20,000g/m2/24h provide moderate performance and values over 30,000g/m2/24h provide high performance.

A windproof garment does not allow any air to permeate the fabric.  A garment with windproof panels has panels of fabric that are totally windproof, but the rest of the garment may not be windproof.  A wind-resistant garment resists some wind, but not as much as a garment that is windproof.

Usually referred to as DWR. A treatment made to fabrics that causes water to bead and run off instead of soaking through. 

This website uses cookies

MEC Hydrofoil Stretch Jacket - Women's

Compare (0)