MEC Aquanator Rain Jacket - Women's
- Available online
- Find in store
Shop with confidence. If it's not working out like you expected, you can return it.
Really. If it's not up to snuff after you use it (a couple times) you can still bring it back.
It lasts longer than 30 days, but not forever. We'll be fair about it. We're all members here.
Price match guarantee
Found a better deal in Canada? Up to 30 days after purchase – we’ll match it.
If you see a lower price for this exact item advertised online, in print or in a store, give us a call at 1 (888) 847-0770.
If it’s identical, brand-new, in stock, and sold and shipped by a Canadian-based retailer, we’ll match that price.
Totally waterproof and moderately breathable, the Aquanator is an all-rounder for rainy season walks or for wet-weekend campouts. The waterproof-breathable fabric keeps you from getting wet or feeling clammy during moderate activity and underarm zips add venting if you end up working a little harder.
- Made of lightweight yet durable 40-denier nylon with a Pertex Shield waterproof breathable coating.
- Unlined 2.5-layer construction keeps it lightweight and packable.
- Fully taped seams keep wetness from seeping in.
- Attached hood is adjustable with rear and side toggles. Laminated brim sheds rain away from your face.
- Full-length front zipper has a storm flap for extra protection.
- Chin guard is lined with soft fleece.
- 2 zippered handwarmer pockets.
- Underarm zips let you vent heat when you're working hard.
- Cuffs are adjustable with hook-and-loop closures.
- Shockcord adjustable hem is slightly dropped in the back for more rear coverage.
Technical garments, designed for specific activities have features that aren’t always adaptable to general use. For example, cycling clothing is longer in the back and arms. Activity aside, the fit of MEC clothing falls into these categories:
|Face fabric||40-denier nylon|
Fabric waterproof rating
The standard test for waterproof fabrics uses a standing column filled with water. The figures given are the water column height. A rating of 3,500mm or higher can be considered waterproof. The higher the rating, the more durable the waterproof fabric will be over time.
Waterproof garments use waterproof-breathable technologies and are fully seam-taped. Water-resistant garments use waterproof-breathable technologies but their seams are not taped. Water-resistant garments repel water and protect against wind but are not made of waterproof fabric.
|Waterproof with fully taped seams|
Fabric active breathability
The rate at which a waterproof breathable fabric expels moisture when the inner surface is moist from perspiration. Values under 8,000g/m2/24h provide low performance, 20,000g/m2/24h provide moderate performance and values over 30,000g/m2/24h provide high performance.
A windproof garment does not allow any air to permeate the fabric. A garment with windproof panels has panels of fabric that are totally windproof, but the rest of the garment may not be windproof. A wind-resistant garment resists some wind, but not as much as a garment that is windproof.
Durable water repellency
Usually referred to as DWR. A treatment made to fabrics that causes water to bead and run off instead of soaking through.
|Product sustainability||Bluesign® Approved Material|
- Measure fullest circumference, keeping tape up under arms and across shoulder blades.
- Natural waist
- Measure at the narrowest circumference of your waist.
- Stand with feet together and measure at fullest circumference.
- Arm length
- Bend elbow gently, then measure from centre of back of neck out to point of shoulder, down to back of elbow, and forward to wrist.
- Petite arm length
- Bend elbow gently, then measure from centre of back of neck out to point of shoulder, down to back of elbow, and forward to wrist. Petite size garments are also proportionally shorter overall. Not all styles are available in 'petite'.