For focused workouts that yield results, you can't beat the consistency and accuracy of power-based training. And this unit is as low-profile and lightweight as a power meter gets – 15g, with a minimalist housing and sleek front profile. You can expect wattage readings to be accurate within 1.5%. ANT+ and Bluetooth Smart compatibility make it good to go with pretty much any major GPS or cycling computer on the planet. The compact, easy-to-source, coin cell battery's life is over 200 hours, and you can swap it out quickly without tools. The 3rd generation Stages power meter is more accurate, has an upgraded antenna and now features an LED light to confirm calibration and battery level.
- Comes pre-mounted to proprietary Stages Power carbon non-drive crank. Be sure to select the correct length.
- Stages Power crank is compatible with 386EVO model cranks without the need for additional parts.
- Can be fitted to SRAM Road, SRAM Mountain and Race Face cranks using the correct Stages BB30 spindle (sold seperately).
- Same low-profile case as the previous version, with upgraded electronics for improved signal strength.
- LED indicator displays battery level at startup and confirms calibration.
- Fully sealed unit with IPX 7 waterproofing.
- Power is measured in kilograms via strain gauge and mathematically converted to Watts.
- Active temperature compensation allows accurate readings regardless of weather.
- Accelerometer-based cadence readings keep your bike free of wires, magnets, zip-ties and other hardware.
- Specifications: accuracy: ± 1.5%, power range (Watts): 0 to 5000, cadence range (rpm): 10-220.
- Wireless firmware upgrades keep the unit future-proof.
- ANT+ and Bluetooth Smart compatibility.
- Software compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center and others.
- CR2032 battery lasts 200+ hours and is user-replaceable without tools.
- Fits most bike frames; check Stages fit guide for details.
- Spindle A: for SRAM Red 22 cranks.
- Spindle B: for SRAM Force 1 BB30, Force CX1 BB30, Force 22 BB30, Rival 22 BB30 cranks.
- Spindle C: for SRAM BB30 mountain bike cranks with a 9mm drive side spacer.
- Spindle D: for SRAM BB30 mountain bike cranks with a 15.5mm drive side spacer.
- Spindle E: for Race Face Next SL crank.
|Bottom bracket included||No|