MEC Aquanator 5 Jacket - Boys' - Youths
Shop with confidence. If it’s not working out, you can return it (consumables, undergarments and swimwear excluded).
Really. If it's not up to snuff after you use it (a couple times) you can still bring it back.
It lasts longer than 30 days, but not forever. We'll be fair about it. We're all members here.
Price match guarantee
Found a better deal in Canada? Up to 30 days after purchase – we’ll match it.
If you see a lower price for this exact item advertised online, in print or in a store, give us a call at 1 (888) 847-0770.
If it’s identical, brand-new, in stock, and sold and shipped by a Canadian-based retailer, we’ll match that price.
A little rough weather shouldn't prevent dedicated adventurers from getting outside. The fully waterproof-breathable fabric on the Aquanator Jacket ensures dryness through wet and windy conditions. The relaxed silhouette easily fits over several warm layers and can be worn as just a light jacket as conditions require.
- Shell is abrasion-resistant 75-denier polyester with a polyurethane waterproof-breathable coating and a DWR (durable water repellency) finish.
- Fully lined with polyester mesh that slides well over a fleece or sweatshirt and is soft against skin when you wear the jacket over just a T-shirt.
- Zippered hand pockets for thawing fingers.
- Storm flap over zipper keeps weather out.
- Elasticized cuffs seal out the cold and damp.
- Reflective details for low-light visibility.
- Name label on the inside helps make those games of “whose is whose” a bit easier.
Measured in grams per square metre (gsm). The larger the number, the heavier and thicker the garment.
|Technology||Microporous PU laminate|
|Face fabric||75-denier polyester|
Fabric waterproof rating
The standard test for waterproof fabrics uses a standing column filled with water. The figures given are the water column height. A rating of 3,500mm or higher can be considered waterproof. The higher the rating, the more durable the waterproof fabric will be over time.
Waterproof garments use waterproof-breathable technologies and are fully seam-taped. Water-resistant garments use waterproof-breathable technologies but their seams are not taped. Water-resistant garments repel water and protect against wind but are not made of waterproof fabric.
|Waterproof with fully taped seams|
Fabric active breathability
The rate at which a waterproof breathable fabric expels moisture when the inner surface is moist from perspiration. Values under 8,000g/m2/24h provide low performance, 20,000g/m2/24h provide moderate performance and values over 30,000g/m2/24h provide high performance.
A windproof garment does not allow any air to permeate the fabric. A garment with windproof panels has panels of fabric that are totally windproof, but the rest of the garment may not be windproof. A wind-resistant garment resists some wind, but not as much as a garment that is windproof.
Durable water repellency
Usually referred to as DWR. A treatment made to fabrics that causes water to bead and run off instead of soaking through.
|Additional feature(s)||Reflective details|
|Product sustainability||Bluesign® Approved Material|
How to measure
- Measure fullest circumference, keeping tape up under arms and across shoulder blades.
- Measure at the narrowest circumference of your waist.
- Stand with feet together and measure at fullest circumference.
- Arm length
- Bend elbow gently, then measure from centre of back of neck out to point of shoulder, down to back of elbow, and forward to wrist.
- Measure inner leg from crotch to just below the ankle bone.
- Stand with back straight; measure from highest point on head to floor.