Versatility never looked so great. With the Thermoball Triclimate jacket, you get three options. Option 1 is a durable waterproof shell. It's smartly featured with handwarmer pockets, underarm zips and an adjustable storm hood to seal out the wind and rain. Option 2 is a light insulated liner jacket that retains heat, but is light and compressible. And Option 3 is zipping them together to create the ultimate cold-weather system for hiking, skiing or making it through whatever rain hammered, wind-blasted situation you're in.
- Shell and liner can be worn together, or separately.
- Fully seam-taped shell with DWR keeps you dry.
- 75D polyester DryVent™ 2.5-layer fabric on shell exterior and 30D nylon fabric on shell interior.
- Liner jacket combines ThermoBall™ Eco and PrimaLoft® for warmth even when wet.
- YKK Vislon zipper with rear storm flap closes the shell, and a second zipper attaches the shell to the liner.
- Storm hood on shell is adjustable with a stiffened brim.
- Underarm pit zips on shell offer instant ventilation.
- 2 zippered handwarmer pockets and 1 zippered exterior chest pocket on the shell.
- 2 handwarmer pockets on the liner.
- Velcro tabs on cuffs on the shell and elastic cuffs on the liner.
- Hem cord on the shell keeps the drafts out.
- Centre back length: 75 cm on the shell and 69 cm on the liner.
|Ideal for||Casual wear|
|Face fabric||75-denier polyester|
|Insulation||Multiple synthetic weights; see product description|
Fabric waterproof rating
The standard test for waterproof fabrics uses a standing column filled with water. The figures given are the water column height. A rating of 3,500mm or higher can be considered waterproof. The higher the rating, the more durable the waterproof fabric will be over time.
Waterproof garments use waterproof-breathable technologies and are fully seam-taped. Water-resistant garments use waterproof-breathable technologies but their seams are not taped. Water-resistant garments repel water and protect against wind but are not made of waterproof fabric.
|Waterproof with fully taped seams|
Fabric active breathability
The rate at which a waterproof breathable fabric expels moisture when the inner surface is moist from perspiration. Values under 8,000g/m2/24h provide low performance, 20,000g/m2/24h provide moderate performance and values over 30,000g/m2/24h provide high performance.
A windproof garment does not allow any air to permeate the fabric. A garment with windproof panels has panels of fabric that are totally windproof, but the rest of the garment may not be windproof. A wind-resistant garment resists some wind, but not as much as a garment that is windproof.
Durable water repellency
Usually referred to as DWR. A treatment made to fabrics that causes water to bead and run off instead of soaking through.
|Additional feature(s)||3-in-1 jacket system|