Our next to skin fit that contours the body for no distractions

Body fit

Our close to body fit with a low profile silhouette for ease of movement

Slim fit

Our standard, slightly off body fit for unrestricted comfort

Regular fit

Our roomy, off body fit for maximum comfort and easy layering

Relaxed fit

key.measurement

key.chest

key.waist

key.hips

key.arm_length

Summit

Black

Alder

Salmonberry

<p>Totally waterproof and moderately breathable, the AQUANATOR® is an all-rounder for the rainy season or wet weekend campouts. The waterproof-breathable fabric keeps you from getting wet or feeling clammy during moderate activity, say hiking in Kananaskis country or exploring Fogo Island. Our AQUANATOR® rainwear line was designed in-house by MEC and is totally waterproof and moderately breathable.</p><ul><li>Made of 100% recycled, Japanese-milled 50-denier ripstop polyester in a 2.5-layer waterproof-breathable construction with fully taped seams</li><li>PFAS-free DWR (durable water repellent) finish for superior waterproofness</li><li>Attached hood is adjustable with rear and side toggles. Laminated brim sheds rain away from your face</li><li>Full-length front zipper has a storm flap</li><li>Chin guard is lined with soft fleece</li><li>2 zippered handwarmer pockets</li><li>Cuffs are adjustable with hook-and-loop closures</li><li>Shockcord adjustable hem is slightly dropped in the back for more rear coverage</li><li>Jacket stuffs into its own left pocket</li></ul>

MEC x AQUANATOR Rain Jacket - Men's

X-Small

Small

Medium

Large

X-Large

XX-Large

The standard test for waterproof fabrics uses a standing column filled with water.  The figures given are the water column height.  A rating of 3,500mm or higher can be considered waterproof.  The higher the rating, the more durable the waterproof fabric will be over time.

Waterproof garments use waterproof-breathable technologies and are fully seam-taped. Water-resistant garments use waterproof-breathable technologies but their seams are not taped. Water-resistant garments repel water and protect against wind but are not made of waterproof fabric.

The rate at which a waterproof breathable fabric expels moisture when the inner surface is moist from perspiration.  Values under 8,000g/m2/24h provide low performance, 20,000g/m2/24h provide moderate performance and values over 30,000g/m2/24h provide high performance.

A windproof garment does not allow any air to permeate the fabric.  A garment with windproof panels has panels of fabric that are totally windproof, but the rest of the garment may not be windproof.  A wind-resistant garment resists some wind, but not as much as a garment that is windproof.

Usually referred to as DWR. A treatment made to fabrics that causes water to bead and run off instead of soaking through. 

Adventure Awaits! Gear up for your next journey with an extra 20% off select clearance products. Discount applied in-cart.

MEC x AQUANATOR Rain Jacket - Men's

Compare (0)