Description
Updated for 2020, the new Spark 2.0 now has greater fly coverage and the ability for ultralight fly-and-footprint setup. Weighing just over a kilo, it has a roomy interior that gives you plenty of room to hang out, read, escape bugs and, of course, sleep soundly.
- Polyester ripstop fly is UV-resistant and stretches less than nylon when wet.
- Lightweight nylon and mesh canopy balance weather protection and ventilation.
- Fully seam taped.
- DriBase™ waterproof floor offers durable water protection throughout the lifetime of the tent.
- Single peaked vent in the fly.
- Featherlight DAC NSL poles have pressfit connectors and a high strength-to-weight ratio.
- Hubbed pole design creates steep walls for greater internal volume.
- Reflective zipper pulls and stake-out cords.
- 2 interior mesh pockets.
- Includes 8 DAC aluminum J stakes, guylines and stuff sack.
- Optional footprint available for floor protection or an ultralight configuration (sold separately).
Tech specs
Show
Tech specs
| Weight | 1.34kg |
|---|---|
| Ideal for | Backpacking |
|
Capacity
The number of average sized people that the product can comfortably sleep. |
1-person |
| Seasons | 3-season |
| Door(s) | 1 door |
| Vestibule(s) | 1 vestibule |
| Canopy fabric | 30-denier nylon ripstop |
| Canopy mesh | Nylon no-see-um mesh |
| Floor fabric | 30-denier nylon ripstop |
| Floor coating | Ether-type polyurethane |
|
Floor waterproofness
The standard test for coated fabrics uses a standing pipe (column) filled with water. The figures given are the water column height. A 1000mm coating allowed no leaks after 1 minute under 1000mm of water. |
5000mm |
| Fly fabric | 30-denier polyester ripstop |
| Fly coating | Ether-type polyurethane |
|
Fly waterproofness
The standard test for coated fabrics uses a standing column (a pipe) filled with water. The figures given are the column height. A 1000mm coating allowed no leaks after 1 minute under 1000mm of water. |
3000mm |
| Pole | DAC NSL aluminum |
|
Floor length
A measurement based on the longest point of the tent. |
2.18m |
|
Floor width
A measurement based on the widest points of the tent. |
0.95m |
|
Floor area
Square metre measurement of a tent’s usable space. Does not include vestibules. |
1.7sq. m |
| Interior peak height | 0.9m |
|
Minimum weight
Includes just the tent, poles, and the fewest pegs and guylines needed to properly set it up. |
1.19kg |
|
Packed weight
Includes the full tent with its stuff sack, repair swatches, and all the guylines and pegs. |
1.34kg |
| Packed size | 42 x 10cm |
| Vestibule area (primary) | 0.654sq. m |
|
Free standing
These tents can be set up without stakes or pegs on any type of ground. All tents should be anchored or weighted, so they don't blow away. |
Yes |
| Additional feature(s) |
|
| Made in | Vietnam |