**IMPORTED FROM AS400**

KEY POINTS & INTENDED USE

Very efficient loss-resistant progress capture pulley. Pulley-cam unit for haul

ing or rescue situations, which allows a rope of 8-13mm, and which has a lower c

onnection point for creating different types of hauling systems.

Designed to allow rope installation while the pulley is connected to the anchor

. Large diameter sheave and great efficiency; it is particularly appropriate for

hauling heavy loads on big walls. The side plate locks when loaded and prevents

the opening of the pulley during use.

Replaces the Pro Traxion P51. Updated design.

CONSTRUCTION & DESIGN

Aluminum, stainless steel, and nylon.

Certifications: CE EN 567, NFPA 1983 Technical Use

265 grams

Rope diameter: 8mm - 13mm

Efficiency: 95%

Working load: 3kN x 2 = 6kN

Working load as a progress capture pulley: 2.5kN

- allows a rope to be installed while the pulley is connected to the anchor

- large diameter aluminum sheave mounted on sealed ball bearings for efficiency

- side plate locks when loaded and prevents opening of the pulley during use

*page down*

- lower connection point for different types of hauling systems

- toothed cam with self-cleaning slot optimizes performance under any condition

s including rope that is icy or muddy, etc

- may be used as a simple pulley by locking the cam in the raised position

Petzl Pro Traxion Pulley